does anybody of you know or could check the "CPU utilization" on the CASA C3200 CMTS? We are using two of them right now.
On both of them is approx 900 modems, but the difference is in the subscriber's packets/bandwidth.
On one of them, we have the "biggest" packet 25/5Mbit and half of the subscribers are on that 25/5 packet. There we have just 4 DS bonding channels.
On the other CMTS is the highest packet 300/15 Mbit and also half of the subscribers have that packet. There we have 8 DS bonding channels, and in some MAC DOMAIN also 16 DS bonding channels.
Know your in the vendor space. In fact, I worked a long time ago where I believe your still at. Would like to email you privately about diagnostic modems but I cant find a way to private message you here.
Hi
We are having problems sending video by WhatsApp through cable modem, some do not finish sending completely
The same to upload to whatsapp states
testing our internet through a router that does not go through cmts works fine
According to the output from show cpu-history, this problem is not due to high processor usage
Reviewing the utilization of the load balancing in the downstream channels, it is observed that the first 8 have a higher percentage than the rest of the channels, this is not right, the percentage of use should be more equitable
Looking for Arris firmware, TS 9.1.103S5AN and/or TS 9.1.103S5AR or any newer Arris firmware with a PKI certificate that does not expire in Nov 2021. Would be greatly appreciated. email is farewell4950@yahoo.com
Hello All
I've got about 600 sb6141 with original firmware on an old Cisco w/ 88v's with 8 chnl bonding. plan is to migrate to an Arris C4 with 32 channel bonding. I've had issues in the past with old 8 chnl bonding modems and wanted to get them upgraded to avoid issues.
would anyone happen to have firmware and cert file I could use?
Please let me know, cmcaldas at gmail dot com
I've built a small app our techs can use to monitor CMTS status, currently has simple things like upstream SNR, total modems online/offline, that sort of thing.
I'm trying to add a simple ping test to show online/offline and latency, but I'm getting strange results from the CMTS for mac addresses. When I query the CMTS for a list of MAC addresses, most return fine but some show up like "P9UJ%", "P9UT[", "P9UK5", "P9UMv".
dear all the time while my cmts goes from a cpu around 15% to 90% and then falls back to normal levels. in the log at the last event is the one in the attached file. cmts is a ubr10k with PRE-4 and fw ubr10k4-k9p6u2-mz.122-33.SCG6.bin. any tips to solve this ??
