We have been beating our heads against this C4 for a long time trying to get snmp-traps to work correctly. We have some traps coming in but they are all trapSeverity.0 7 cmResetReason.0 SM_RANGING_SAME_CHAN type traps. We are trying to get the normal on/off registration traps to work with our monitoring software.
Can anyone help with what needs to be done to have it send all traps?
Comtek is a specialist aftermarket services company. We have recently added the BSR 64000 to our portfolio of supported products. If anyone is looking for a repair solution the please contact me
I am posting this after finally fixing this problem.
We have Cisco 7200ubr equipment. TOD does not seem to function on these devices, and it is a terrible idea to run them as they use udp-small-servers which are regularly attacked. After multiple attempts to get UDP/37 TOD running on these devices I gave up.
Dear , I need to know if there is any mib / oid that the IP of the CPE report me (PC / router connected to a cable modem )
From already thank you very much
personnel have the following situation. on a cisco cmts 7246vxr on an interface with two downstream modem online one 5101 model and another mta 5121. not have cpe connected those modem. I noticed that it has a bitrate in 5121 in mta interface dowsntream of 256kbit/s while the 5101 has nothing. this bitrate also appears in the interface dowsntream cmts. see attached file. Anyone know who this. is to filter this bit rate.
Dear friends, I need a sample configuration for a Arris C4 CMTS with DOCSIS 3.0. Today I work with DOCSIS 2.0 and I want to start testing with DOCSIS 3.0. I will appreciate all the help you can offer me.
Hello,
We are professional manufacturer of CMTS for 15 years in China. Nowadays we are looking for distributors globally .Most cost effective CMTS with superior quality is available.
Any interest pls let me know.
Pls visit www.cqjinghong.com for more info.
Thanks and best regards,
Emily Du
Tel:023-68697358
Fax:023-68697368
Email:duxx@cqjinghong.com
Hello everyone. I wanted to ask if anyone running DOCSIS3.0 could provide some insight on how they setup 65+Mbps downstream service flows. Typically what I do is provision the CM config file to be ~10% higher than the advertised speeds, so for 50Mbps advertised service I provision 55Mbps. I'm just not sure how well this will scale. Our company want to offer two higher tiers than we do now(our highest is 50Mbps). I've been asked to build 65Mbps and 80Mbps. I have only what's required in the CM config file for the service flow, everything else is default settings.
