Docsis chat

Hi,
I'm prepairing a chasis configuration with ubr10012 chasis. I need to coexist a docsis3.0 card and a euro-docsis2.0 card. The cards that I selected is: uBR10-MC5X20H-D(for EURODOCSIS2.0) and UBR-MC20X20V-20D(for DOCSIS3.0).

Is there any incompatibility between this cards and configuration?.

Thanks in advance.

Hello all,

Hi there,

I am having problem with my BSR64K slot 8. At 1st it shows "Flash" . Then when re-inserted the module it's show "UNKNOWN".

I have also attached the snapshot of the LED Indication and the parameters entered.

Please advice.

Hello everyone.

I have a customer that is currently working with just 1 ISP for his network, but because the grow he needs to add a secondary ISP (because the current does not support more bw) and put them work together. The main problem is that this network uses public (valid) IPs, so I have several questions about how to do it. Other note is that this network is not an AS network, in fact, the public segments are published on the ISP.

Hi!

A customer has a couple of C4c's and in two places, the noise is a bit overwhelming. We do have the following in the config:

fan speed-control no shutdown

I have also issued the following:

configure fan monitor 0 no shutdown
configure fan monitor 1 no shutdown
configure fan monitor 2 no shutdown

We are looking for example configuration file for DOCSIS 3.0 CABLEM MODEM CISCO EPC3208G thank's for help

Hello Everyone...

I have an issue with an Arris C3 CMTS. The dhcp server shows messages like this:

Hello to everybody,

Hello,

I'm looking for mibs to off "ip flood detection" in the firewall section on EVW3200/EVW320b.

when its turn on, it makes alot of "time outs" and dropping connections.

its similiar to other ubee modems, wifi have same mibs like rest of ubee .
(ex. ddw3611/evw3200 .1.3.6.1.4.1.4684)

every help will be appreciated.

Cheers!
Lukasz

Dear all,

has someone got a working SIP-MTA-Configfile for the EPC3212 (Firmware SIP-Version)? The corresponding SNMP-MIBS would be helpful as well.

If so please get in contact with me on: epc3212.5.emsi@neverbox.com

thanks in advance!

Oliver