Docsis chat

Hi!

I try to install Ca manufacturer certificate (Thomson) on the BW, but it wasn't success. Read the Ops manual, execute the operation step by step, but I always get error:
cable privacy certificate root 10 30 82 03 4f 30 82 02 f9
-------------------------------------------------------------^
% invalid input

Can anybody help me please?

Regards,

Gyu

Hello , does someone know who to use theus feature of the BSR64K ?, is there the need of using a software besides the configuration of the fft and snr made on the BSR? , I have noticed that when a display , for instance

BSR#fft display 2/1 startfreq 0 endfreq 81920000 table

Power Level Measurement - Slot : 2, Port : 1
==================================================

Number of Samples : 512, 9th Receiver Opmode : Tap-in
Window Coefficient used : Rectangular
Start Frequency : 0 Hz, End Frequency : 81920000 Hz
Frequency Step Size : 320000 Hz

Hello,

I'm having trouble setting the interface upstream description, it seems like I only can set the cable description and not for each upstream. I haven't seen any info on this on the manual.

Any tips ?

Best regards,
FR

Hello ,

I am trying to set up my uBR7246 VXR and CNR6.1 to have CM and MTA fully provision. I have been able to successfully provision individual modem manufacturers, however, when I try to provision multiple modem manufacturers, I am stuck. I will have to list the Modem MAC under client's for it to get its file. Is there a way to assign a range of MAC using CNR? For example can I set something like (00a345000000 00a345ffffff) such that any modems in this range will get a specific config file?

Thanks for your help.

Hello,

recently we put another CMTS in service in our network. I have defined new config files for modems that need to go to this CMTS. In that config file I specified it's downstream frequency and upstream channel ID to which I want them to connect. Most of the modems did that correctly, but we have some 10% that receive the file and then do nothing. It looks like they could not find that upstream channel.

Hello im having problems when i installing the docsis-server 3.5 on centos 5, here i prompt the end of the Make:;

........
usr/bin/install -c Stress_Config_Generator /usr/local/sbin/Stress_Config_Generator
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/root/install/docsis_server-3.5/src'
make[1]: Leaving directory `/root/install/docsis_server-3.5/src'
make[1]: Entering directory `/root/install/docsis_server-3.5'
make[2]: Entering directory `/root/install/docsis_server-3.5'
make[2]: Nothing to be done for `install-exec-am'.

Well we finally have our MPLS network in place and I am gearing up to centralize all of our provisioning and add as much redundancy as I can. My goal is to have one main DHCP server with a secondary one synced up and ready to load balance if need be. I have a test version of this running (a site dhcp server as the master and my main server at the headend as the slave), but I am having issues with the BootP part of the equation. It appears that the ICS DHCP server doesn't like to failover pools with bootp enabled.

Hello , can someone help me with this ... , I am working with a BSR 64000 Motorola BSR, I am aware the Power RX is negociated between the CM and the CMTS , at current configuration I have it set in the CMTS to be 14dBmV, I have some CM registered with low power level reception , - 0.5 , 8 , 10 dBmV , it happens with some CMs in different Upstream channels , so I dont think it is a plant problem, can be the wire instalation at clients home ? or a problem with the CMTS in the process of negociating the power level , how can this low power level affect the service being provided ?

can someone please help with what command (s) to use to find out VoIP Modem Count on a CMTS?
Thank you

Could someone point me in the direction of a Option 122 Calculator? I would be greatly appreciative.

Corey