Docsis chat

Hello!
There is a Technicolor TC7200 CM_Firmware: STDD.01.04
You can share the new firmware.
Perhaps it's in the firmware, in the description of the TC7200, it simultaneously supports the wi-fi 2.4G and 5G network.
On firmware STDD.01.04, only the choice of 2.4G or 5G.

Hi Folks,

Due to complications I can't go into I need a CMTS and CM config which will restrict the CM to 1 downstream channel. I've attempted this in the past following the CMTS documentation and I had no success.

The CMTS SW I am running is:

Slot12 HSIM 2-port GIGE/8-port 10/100 Ethernet (GE2/ETH8) Versions:
Boot ROM: RDN ROM Version: 7.0.0.43 Creation Date: Fri Jul 26 11:03:59 EDT 2013
Image: 6.4.2.2


Appreciate any tips.

Q.

I was wondering if anyone knew what steps to take when locked out of a RFGW-1-D?

Is the console port underneath the bezel of any use? I can get in but the VxWorks commands are unfamiliar to me.
I'm guessing a conditional access IP was set and the device can no longer be accessed via the web interface, but it is still operating as it should.

Any ideas?

Thanks

does anyone have software and is willing to share it for the uBR10K? Namely the Pre5 modules. If you have any of the below pls send to rkerekesus@gmail.com
Thanks

ubr10k5-k9p6u2-mz.122-33.SCJ4.bin
https://software.cisco.com/download/home/284357715/type/280805680/releas...

Hi all,

https://github.com/l-n-monitoring/CM-RT-GRAPH

Hi guys,

As a docsis engineer with 20 years of experience I would like to present to you the easiest way to monitor your fiber nodes on the CMTS(es). It looks cool and it is big data, so unlimited choises of queries in influxdb exist for you to get the best reports regarding your cable plant. There is some work still to be done for it to be perfect, so I need your help.

https://github.com/l-n-monitoring/CMTS-Monitoring

Please comment and please share!

Hello,
Does anyone have documentation for the BSR64000 software - 6.4.0 or 6.4.2.
I hope you can share it.

Thanks in advance.

Hello,

Does anyone have experience using these modems? They seem like a great D3.0 modem with the full band capture feature.

Hi,
we are having a situation where we want to offer ipv6 directions from a DHCPv6 KEA Server, this one is located in an different network from the CPE that we want to offer the IPv6, so we are using the BSR as a relay-agent. The solicit package gets to the BSR and lates it sends the relay-forwarding package, but when the servers responds with the advertise package, it never gets to reach the BSR.
The following lines shows a debug in BSR64K:

good day to everyone.
it turns out that I have a motorola cmts, out of nowhere 3 ports of the R48 card stopped working, I made the configuration in a new interface and I can not get the cable modem online again using the ports that stopped working.
someone who can help me to see what happened.
thanks