Docsis chat

Hello

I checked my parameters at modem recently and noticed that both my downstream and upstream power were high.

Downstream : +10 db
Upstream : +52 db

What can cause this thing to happen and how can I fix it?

Thanks,

Does anyone have user documentation of cadant C4C, I try to search it but no luck for me. TIA for anyone who have copy.

Looking for firmware version 7.5.93D.

Email to proairpass (at) yahoo.com

please, someone could provide the firmware sip that EMTA send to email fcr1205@gmail.com.

thank you so much.

Hi guys,

I would like to know if Ubr10k with UBR-MC20X20V linecards supports more than four bonded upstreams in a mac domain? if
the answer is yes could somobody share the cmts configuration. The Goal behind is to use for Modems which already
support 8 channels bonded in upstream.

Any help would be appreciated

Thanks
Guys

Hello,

I am currently facing some issues with an unstable upstream SNR.
As the two pictures below show two modems connected on different nodes you can see the difference in upstream SNR.
The first one has many ups and downs and is very unstable ( upstream SNR varies from 25-33 ), this value is common in most of the nodes.
The second one is more stable and has a higher value of SNR, about 36.1 ( we were working on the line when there was a drop that lasted 2 hours ) than the first one.
We have checked the nodes and amps and there are no signs of noises.

Hi,

after trying too long to provision the mentioned SIP-MTA (with Firmware Revision: 9.1.103S1), some kind of frustration comes up. CM is operational and the MTA goes online and loads the appropriate config file - written like:

Main
{
MtaConfigDelimiter 1;

SnmpMibObject pktcMtaDevEnabled.0 Integer 1; /* true */
SnmpMibObject sipCfgDigitMap.0 String "x.T";

Hi Team

We are using in our Lab BSR Euro-8*4 CMTS, all are using same config file, for all it is taking 5 to 7 minute to upgrade/downgrade an image, but from my location it is taking almost 3 hour. So what might be the problem,I have checked with all Euro CMTS, changed the RFC feed also,but still now the same problem. Please tell me the solution for this, and this I m facing now on wards,before that it was fine.

How to change the upgrade/downgrade speed from arris config file ?

Thanks,
Laxmi

WTS: UBR-MC3GX60V 50D/32U

Cisco 3GX60V DOCSIS 3.0 Broadband Processing Engine.

This card is configured for 50 Downstream and 32 Upstream.

@ $4900.00 each REF

Tested Working with a 1 Year Warranty

Also have
UBR10012
UBR7246VXR
UBR-MC28U
UBR-MC28X
UBR-MC28C

Let me know if you are interested.

Thanks

Robin

Anybody have last firmware for SBV6x2x??

SBV6X2X-1.0.2.4 or SBV6X2X-1.0.6.1

please send zintana@gmail.com