Docsis chat

We have a Motorola BSR64000 available. Has a TX32 and a RX48, SRM4, and an EtherFlex 10/100/1000 module. All offers considered. Any questions email acollard@rcicommunications.com or call 517-663-7514.

Was curious to see what anyone else had for Incognito?

I am wanting to do a script that pops in customer information en masse on the CLI side. Has anybody done this? I am assuming someone at Cox Communications would know to some extent.

anyone have WTM652G SIP firmware can share. thank you.

fcr1205@gmail.com

Tengo un CMTS uBR10012 con la configuración, que aparece a continuación; el problema es que solo me da consumo máximo de 90Mb/ps; cuando tengo 500MB/ps para repartir alguien puede ayudarme con esto , o que tengo que modificar.

UBR10012 CMTS have a configuration, below ; the problem is that only gives me maximum consumption of 90Mb / ps ; when I have 500MB / ps to hand someone can help me with this , or I have to change .

Building configuration...

This New Cisco uBR10012 Universal Broadband Router. include below :

1x UBR-MC3GX60V
2x UBR10-PWR-AC-PLUS
2x UBR10-dtcc
1x UBR10-PRE5

Cables and rack mount, and full original accessories.

The Cisco uBR10012 features these components:

• A maximum of eight RF line cards

• A maximum of six Wideband SPAs for Wideband channel bonding

• A maximum of two 4-SPA interface processors (SIPs), the carrier card for the Wideband SPAs

• A maximum of two WAN SPAs to connect to the IP backbone and external networks

Hi,
my problems is that I new in the configuration, now some problems with with the configuration, please any examples of configuration

Hello, we have two used Harmonic PVR6070 ProView PVR 6000 Professional IRD in stock used with 1 year warranty at $795.00 obo. We have a large inventory of headend equipment here. Please let me know if you have any specific Arris or Motorola BSR64000HD needs. Thanks.

Kurt Paulus
NW Remarketing Inc
503.391.8191 x114
503.881.3578 Direct
503.375.8470fax
AOLIM- kurtnwr
Skype- kurtnwr
kurt@nwrusa.com

Hello all,

I recently obtained a CASA C1G with an 8x8 license on it. I can bond to the first 4 of the upstreams but cannot bond with the last four.
Here is my config

Any suggestions are greatly appreciated.

Thanks in advance.

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.22 12:27:04 =~=~=~=~=~=~=~=~=~=~=~=

!
!
!

!end of configuration

C1G#show run
!
! CASA-C1G system running configuration
!
! System boot device is: nvram
! Boot Image: C1g.gz.rel1G.1_build9.4

Anybody else having problems with these modems (Arris DG860P2) in their plant?

Originally it was thought that it was old firmware (7.5) that was causing problems when shifting from 3.2cw 32qam upstream to 6.4cw 64qam.

Now it doesn't seem to matter. Even after updating to 9.1.103S5E the problems persist.

Hi

I remember some time ago we had a cable modem model that had an web interface that allowed us to set the tuner frequency so that it would not range but instead use the frequency that we input

anybody knows which cable modems have that option ?

docsis3 or docsis2

we have a sector that has a lot of different downstream frequencies and the modems are ranging sometime for an hour before finding the correct one

thanks