Docsis chat

I came across this " step in MULPI ATP - Configure the CMTS to send a DBC-REQ message with a Client MAC Address encoding (type 50.4.1) to CMUT, using test MIB mode 122."

Does anyone know how to configure Test Mib 122 on Arris c4 CMTS or any clue appreciated.

Pradeep

Hello,

we habe a Cisco 10k M-CMTS over the whole hf-filed I have Modems they are not go online. In some cases it's a really hf-issue, like a amplifier or the wired connection, but in the most cases there are no hf or other problems in the network.
how can i solve this problem? why didn't send teh teh REG-ACK Message ( or the cmts dont receive this message).

where can i found the tlv info for packetcable2.0 devices

Hello,

Does anybody know how can get a verbose trace of all DHCP/MTA provisioning process with Scientific Altanta EPC2202 MTA ?
I need to know why EPC2202 won't register with our SIP server ...

I've got a telnet access to the modem !

Thank you

Hello,

Do somebody know how can I enable complete Webaccess for Cisco / Scientific Altanta EPC2202 Modem ?
I mean which MIB I must add to docsis cable modem file to enable all web page tabs of the modem like System, Signal, Status, ...

Currently I've got message that told me that the feature is not enabled !

Thank you for your help.

Regards

Hi group

I have the following issue which I don't have an idea about this.

We have 3 cmts (bsr2000, bsr1000 and bsr2000). Each cmts have different DS freq, 555, 561 and 549 Mhz,respectively. The problem is that some cm from 555 are trying to make ranging on 561. The config file is created to redirect modems to 555 but the cable modem gets on send blinkin and trying 561 until I don't know why the cable modem goes online but after long time. When gets online, navigation gets slow.

What could be the reason?

Thanks in advance.

Hi to all.

Does anybody try to setup filters on cable modem config file with diffserv mib tree (RFC3289) ?

I use docsDevFilter but they don't support ipv6 and are marked as deprecated for a some time.

Hi,
I having a digit map configuration query. Below is my digit map config.
In this config I having two issues which are

1:When i keep TIMER in top of digit map configuration then digit map configured perfectly but if i keep domain first and then TIMER, digit map configuration failed.
Is it TIMER should always be first in digit map configuration. I saw PKT-SP-RSTF-I08-110127.pdf spec and in the digit map example TIMER is on top but not mentioned any where whether it should be on top or not.

Hi,

We have 3 CMTS and we want to serve fixed ip address to CM on any cmts.

cmts1 cm network: 10.100.0.0/16
cmts2 cm network: 10.101.0.0/16
cmts3 cm network: 10.102.0.0/16

We want serv to modem1:
- on cmts1 10.100.1.2
- on cmts2 10.101.1.2
- on cmts3 10.102.1.2

current dhcpd.conf:
---
ddns-update-style none;
ignore client-updates;
always-broadcast off;
do-forward-updates on;
one-lease-per-client true;

If you know a company that recently migrated to digital and still have those S.A. 8610X STB.. I am interested in buying.
Let me Know: 1(829)-292-4229

Regards.-