Docsis chat

Has anyone successfully gotten this to work?
"Asking for a friend.... "

If so, what field components are you utilizing?
What CMTS settings?

Only thing RFOG specific on the casa I can see is rfog scheduler in the service group.

At this point in time, the 85mhz return with OFDMA has been replaced with 12 6.4 ATDMA upstreams and only allowing 8 channel upstream bonding modems out the door for those nodes.

Hi,

I research an oid to check the number of active downstream on a docsis-mac interface on a CMTS CASA 100G

Thank You

Daniel

working on setting up a home lab with no support.
i have a cmts docsis 3.0 allready and have the docsis side allready configured and appears to be working but am running into issues with the MTA side of the house.
i have setup option 122.1 and 122.3 and 122.6(BASIC.1) but im not seeing the dhcp request from the modem am i missing anything?

missing audio on a couple of channels on SEM V12 in manual routing. any ideas?

UBR10K 8x4, in the network D 2.0 and D 3.0 modems.

When assigning a slot for transmission to the D 3.0 modem, all 4 US channels will be allocated, and for the D 2.0 modem only one US channel. When assigning a slot to a D 2.0 modem on one US channel, can CMTS assigned slot to another D 2.0 modem on another US channel?

Hello!

I would like to know how would you know OFDMA frequency using oid I'm using an E6000 to test.

Thanks in advance.

Hello!

I have one challenge at the moment is that I'm interested to know the SNR in a OFDMA interface but I don't find it yet, I do found the oid for upstream but it doesn't include ofdma .1.3.6.1.2.1.10.127.1.1.4.1.5.{ifindex}

Is there any oid for OFDMA? also looking the same for corrected and uncorrected codewords

Appreciate any help

Hello, Happy New Year everybody!

Does somebody have a working IPv6 setup with BSR64000? I am trying to set up, however the lack of documentation is a great problem. The router seems to support it, I can bring up addresses on it's interfaces, I can ping those addresses, however I did not figure out, how to attach a proper DHCPv6 helper.
Now, I would not mind running IPv6 DHCP and RA on the BSR itself, if it is possible, either.

Please, if you have a working config, dare to share :) Thanks in advance!

Hi all,

is there any way to tune latency for customers connected to casa c100g cmts via docsis 3?
There is around 20ms latency what is quite a lot (someone say that is normal) but i want to know if there isnt any way to tune the latency to reach 4-5ms stable?

Sometime i can see pings around 4-7 ms but most pings are in 15ms - 22ms range.
Thankx a lot

Help me find the firmware for this router.
serykh dot mobile etc gmail dot com