Im doing some testing locally on my modem Have full serial acces with modem key and looking for the OID to disable VOIP on starts.
It looks that my setting get overwritten by config on boot . I want to disable that permanent
Its a Cisco EPC3928 family
We have received a newer firmware for a rather old Hitron BRG-35503 4x4 Cablemodem.
I've set alle the required configuration for upgrading the cm.
But it doesn't start to download any firmware from our tftp server.
Any hint would be helpful.
After a modemreboot I can read all necessary informations by snmp:
Name/OID: docsDevSwServer.0; Value (IpAddress): correct
Name/OID: docsDevSwFilename.0; Value (OctetString): correct
Name/OID: docsDevSwAdminStatus.0; Value (Integer): allowProvisioningUpgrade (2)
Hi. We are going to switch from ubr7225, 2xMC88 to a bigger platform (we don't want to run on 2 or 3 devices). Compact size is preffered due to lack of rack space. Casa C3200 is IMHO too small (max 48/48 or 64/32), c40G is too expensive :)
We are choosing beetween Arris C4c 64/48 (2x32D and 2x24U, max 96D/72D) and Cisco ubr10k 40D/40U (max 160/160 with 20x20 cards). Either refurb.and factory new). Bundle from Arris is a bit more expensive but is more compact.
About 2k customers.
Now question: Which is better?
We are having issues with voice on our network. We have a Pico MiniCMTS200a and the MTA's are connected to a Metaswitch. We only use Arris MTA's and primarily use TM822G's and TM(4-6)02G's. Users are complaining about "static" and this is among several. It comes and goes and we also have frequent issues where we get a SIP 480 response from the MTA. Below is 2 calls to one of the MTA's that had the issue, from the VQM page of the modem. Ask any questions to clarify. Any suggestions to try would be helpful. Also, we are running 9.1.103S.SIP and DQOS is off in the feature switch.
Also I am trying to implement the freeradius DHCP with a cable modem network. What could so far has been listening to port 67, receive the request of the CMTS have the SQL query and return to the CMTS. Log in to CMTS in dhcp (d), but in freeradius debug appear as sent to the CMTS. Someone who has gone through this problem you can help me?
Hello friends,
I am using a cable modem Cisco DPC3825 model in Arris C4 CMTS.
With cable modem I can not reach high speeds (30Mb), I'm doing bounding 4x1.
I've tried with another model DOCSIS 3.0 cable modem and if I can reach the desired speed.
I hope you can help me to know that it may be happening.
Cheers
I installed a radius server with MySQL database to authenticate cable modems on the network. What is the file and how do I configure this file to DHCP server? How it will treat CPE's customers? I do some configuration on the CMTS? To test have a BSR 2000, but will then be placed in a uBR10k.
I appreciate all the help that comes.
