Docsis chat

Does anyone have Ubee EVM3236 private MIBs?
Thank you.

HI.
I have a ubr10k cmts (122-33.SCF5) with mc20x20 cards.
My idea: Interface cards: 5/1 - active; 6/1 "active redundancy".

The load balancing is works only D2 modems.
D3 modems: the primary ds always 5/1/x.

Hello,
We buy & sell CASA CMTS.

Inventory for sell:
C3200 16DS x 16UP
C3200 32DS x 32UP
C3200 48DS x 48UP
C10g 64DS x 64UP

For more details please email to: sp5rcu@gmail.com

Darek

We just pulled out all our old line cards and installed two MC88V cards. Everything was working fine, and still is. We have a single plant, no segmentation, AKA one spectrum group. Every port on this machine is physically combined and connected to the plant.

I'm totally new to the MC88V cards, but came up with the below configuration. This got us back to the functional level we were at before the upgrade. The problem is that I'm really unsure of the configuration.

Hi folks,
my company recently bought a CMTS Cisco uBR10012 (Docsis 3.0) 20x20 and I started to configure it a few days ago but I'm stuck because the CM I'm using for testing (SBG6580) has the Downstream indicator flashing green permanently...I don't know what I need to check in order CM goes online. I have several Docsis2.0's CMTS working fine but 3.0 is quite different....anyway I'm very very newbie on both. Can anybody please help me???
Thanks in advance.
BR.

Anyone got the MIB files for Cisco EPC3925, EPC3940 and 3940L cable-modems or know from where they can be downloaded ?

I need them for http://librenms.org

Thanks in advance...

Hi all,

I use tcl write a mib browser. It can run on windows and linux.
If you are looking for a free mib browser, maybe these one can do something.

This tool is open source, you can download at below path.
https://github.com/jianiau/Tcl-MIBBrowser

Please let me know if anyone has suggestion or find any issue.
Hope this tool is useful.

Thanks

We are getting below error logs & many of the modems are going init0
Please find the logs from DPE (PCP server)

Looking for version 3.10.1319 for U10C035 modems.

-Tom

Hi,

My CMTS config is attached. I want my CPEs to be able to communicate with devices which are in the same network as my gigaether interface. The subnet of my GigE interface is 172.16.1.0/24 and I want my CPEs to get IP addresses in the same range.

Below are the configs for GigE and Cable interfaces:

interface gigaether 15/0
ip address 172.16.1.46 255.255.255.0
no shutdown
no ip redirects
no ip unreachables