Docsis chat

Hi,

I wondering if anyone have the answers at my problem.

I have few modem TM from Arris on the second bundle i have able to boot few correctly (3 on each interface down with cm and tma config. As soon i have few other, all cable modem get reject(c) error.

I use 2 bundle, first for cable modem with PC and i use the TM on the second bundle (2) for VOIP only.

I'm using CNR 6.2 (Old CNR version but normally should work fine)

I attach the CM config file ubr10012.

I did some debug in log and there is the informations i got ;

This is more for the cable guys in the group... I recently gave away my return signal generator to someone who needed it.
it's a small battery operated two narrow frequency generator that you connect at the house and use a meter to check levels back to the node or headend.
I've got a project coming up and rather than ask to barrow it back, I wanted to buy two. problem is they are only available from China or Korea. anyone in the group know where I could get two? Yes, I checked ebay and they have one, but it's in China and can't wait for the slow boat to arrive.

What is the total 5/1/0 interface traffic?
(ubr10012, mc20v20)

Interface: 5/1/0

with show interfaces summary command:
Cable interafce TXBS: 27764000
Wideband-Cable TXBS:40142000
Integrated-Cable 0 TXBS: 1485000
Integrated-Cable 1 TXBS: 3365000
Integrated-Cable 2 TXBS: 21451000
Integrated-Cable 3 TXBS: 1452000

Cable= Intergated-Cable:0 + Integrated-Cable:1 + Integrated-Cable:2 + Integrated-Cable:3 ???

Total = Cable + Wideband-Cable ???

Hi ,
I am using CISCO CBR8 CMTS having 4 line cards 0/1/2/3. If I reset (shut/ no shut/) to any line card, is there any command to check last uptime of specific line card?
Pl help.

Hi all,
I'm newbie in Cisco CMTS, i trying to setup ubr7225vxr with MC88V card in our lab.
I have many question, but most important thing for me is how to configure BPI and set MC88V card to work as DOCSIS 2.0 only and DOCSIS 3.0 (for e.g 4x DS as pure D2.0 and 4xDS as D.3.0).
Maybe some one can show me sample configuration?
I do not know where to start.
Many thanks.
iptvman

Hey everyone, my setup contains:
a. Cisco uBR10000 chassis (Version 12.2(33)SCG6, RELEASE SOFTWARE (fc1))
b. One MC20X20 I-CMTS 20DSX20US CLC Module
c. Cisco CNPR (Running version 8.3.4)

I have CM's (192.168.168.128/25 network) pool and CPE's (10.210.18.0/25 network) pool configured at my CNPR.
I want somehow to set new DHCP pool that will provide Public IP addresses to several CPE's that i will choose (by MAC address).

I was reading about wideband on MC20X20V, but I did not understand exactly what its functionality is. Someone can take this doubt.

Tks

Hello Everyone,

Does anybody the latest iOS for the uBR7246 VXR SCI3 or SCJ3.
If yes can anybody sent it to me.

If yes please sent it to this email address agashi5@live.com.

Could someone with sufficient access run the attached file through Cisco's CLI Analyzer and tell me what the problem was?

Thanks in advance!

BSR64000HD config
Hi, can you help me, I need config for BSR64000 and start with basic config, now CMTS config is empty, after factory. I need help from someone with config, can somebody help me.
Many thanks :-)

config to fix, downstream, upsteram synchronized, no ip :-(

giganet 15/0 static 192.168.178.2
server dhcp, provisioning linux 192.168.178.1

username sysadmin user-group sysadmin
!
ip domain-lookup
!