Docsis chat

I apologize beforehand for the naive question but I am unfamilar with the details of how DOCSIS works.

I am interested to find out if it would be theoretically possible to have 2 different operators share the same outside plant by operating separate CMTS on it. Could they operate their networks independently by deciding on the allocation of some fixed amount of spectrum on the upstream and downstream to each?

Thanks.

Dear,

           In a cmts cisco uBR10K I am trying to work with 12 channels downstream by 2 upstream. In the network I only have cable docsis 2.0 and 8x4 docsis 3.0. I want the amount of 2.0 cables per downstream x upstream to be balanced. I'm trying to get the 8x4 3.0 cable also balanced. In the example of the file attached the fiber-node cable 50 and 51 worked but the 53 cables 3.0 only picked up a downstream channel and 1 upstream. Can you configure this? Anyone have an idea?

Thank you, Flavio.

Hi All,

Hi there,

We have a CASA C100G and we are having problems with bonding:

hostname#show cable modem non-bonding
MAC Address IP Address US DS MAC Prim RxPwr Timing Num BPI
Intf Intf Status Sid (dB) Offset CPEs Enb
001d.d4d7.3e62 10.11.17.196 12/13.1/0 1/6/4* online(pt) 3476 0.0 3673 2 yes
001d.d4dd.90a2 10.11.1.234 13/0.2/0 2/0/19* online(pt) 8007 -0.7 3203 3 yes
...
...

What is the difference between the power level and signal level? You read power level on modem and it is different than signal level on signal meter. I am looking for some classification. It can be confusing.

Just wondering what everyone is using these days? Any experience whether positive or negative will be useful.

Thanks

Hi,

I have search thru the forum and can't seem to finde any info om a good Capacity monitoring system.

What system a you gys using in your network.
I'm interested in monitoring the capacity in my Docsis plant on a Service Group level.

We have Cisco ubr10k and Arris E6000 in our plant and are using a homemade system that we are want to change and what to hear your experience

Best regard

Torben

Hello,
We buy & sell CASA CMTS.

Inventory for sell:
C3200-DCU16A cards
C3200 chassis
C3200 AC PS units
C3200-SMM cards
C3200 16DS x 16UP
C10g 64DS x 64UP CMTS
C100g 64DS x 64UP CMTS

For more details please email to: sp5rcu@gmail.com

Darek

Hi guys! I need firmware for my arris modems.
Type:

System: ARRIS Euro-DOCSIS 2.0 / SIP 2.0 Touchstone Telephony Modem HW_REV: 04
VENDOR: Arris Interactive, L.L.C.
BOOTR: 6.03
SW_REV: 5.2.31.EURO.SIP
MODEL: TM602B
Product Type: 00000006 010833e2
Product Release: 00000004
Flash Part: MX29LV320BTC
Download Revision: 2
Firmware Revision: 5.2.31.EURO.SIP

Thanks!

Hi,

is anybody using Kathrein TVM 1000?

Is there a manual online somewhere? Or is there a public MIB?

BR

Paul