Docsis chat

Is there a standard way to disable the LAN management ip on cable modems, I need to disable the 192.168.100.1 address. This causes issues with Plume deployments (When cable modem reboots, plume pod sees 192.168.100.1 ip and changes to Bridge mode on some occassions, rather than router mode). Please let me know if it is possible to disable (mostly Arris brand modems) and the best way to do so if possible.

Hello,

i want to enable more DS RF channels into one service group and mac domain to have more capacity that basich 32 primary channels offers.
Is there any way to set up / add more RF channels and include them to same service group/ docsis mac?

I can see the QAM interface provides to configure 48 chanels, but i cant add more than 32 into service group.

I am receiving this error message:

CASA-C100G(conf-if-mac 9)# downstream 33 interface qam 0/7/32
Invalid channel id 33 as primary, channel should be 0-31.

The version I have is
saRg MODULE-IDENTITY
LAST-UPDATED "201505260000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO "support.cisco.com"
DESCRIPTION
"Controls the behavior of router/wireless functions.
Can be part of CM configuration file."

-- history

REVISION "201505260000Z"
DESCRIPTION "Initial release of reduced-set module for releases based on BFC 5.7.x."

::= { saModules 2 }

I need to upgrade DOCSIS transponder 3.1 firmware on Alpha XM3.1-905-HP power supply, via SFP transceiver, ethernet cable and TFTP server on personal computer.

I've installed SolarWinds TFTP server on a PC, configured server bindings to IP address, and copied firmware and config file into TFTP default folder (C:\TFTP-Root).

The IP address of network adapter assigned to TFTP server is set to 192.168.2.20, subnet mask is set to 255.255.255.0.

Hi

Please help me With which username and password can I access the configuration page through the wan IP of the Hitron cable modem model CGN3ACSMR

Through the LAN IP I can access the configuration page with this data
user name: cusadmin
Password: password

Please help me with the username and password information to access the wan IP

Hello All,
Can anyone please confirm if it is possible to get a response for a snmpwalk command on emta/edva interface?

Hi

I want to program a system to know the power levels of the cable modems in the CMTS, can you help me by indicating the best way to do this?

with snmp or with telnet ?

Has anyone developed something similar?

please help me

Hi

Please tell me which supplier I can buy new cable modems

regards

Hello!
I am interested in equipment.
What from this list do you have in stock and what is the cost?
Who can sell or where can I buy?

2 pieces
Cisco RFGW-1:
Licenses
octal license
8_CHANNELS_PER_PORT license
2 pcs -Data license
Modules
6 pcs RFGW-1-D QAM MODULE (2x4QAM)
2 pcs RFGW-1-PS-AC

CISCO SPA-24XDS-SFP - 8 pieces

Cisco SPA-1X10GE-L-V2 - 1 piece

sgmnur (etc) gmail (dot) com

Hello! Does anyone have an SNMPv3 CM sample config file to share? Thanks.