Docsis chat

I'm in the early stages of dual-stack deployment on our cable network. At this stage of testing, there are only IPv6 static routes in place and no DHCPv6 server has been configured. So far subnetting and routing hasn't been too much trouble.

When I configure an IPv6 capable router and connect it to any D3.0 modem, connectivity is fine. I can ping out from any client autoconfigured by the router. From the CMTS, I can also ping the router's WAN IP and the aforementioned clients from the delegated prefix.

We are doing testing for 8x4 Channel Bonding, and are seeing an unusual phenomenon. With 1GHz splitters (2-, 3-, 4-way) and with 1.2GHz (2-, 3-, 4-way) our test modems will not lock onto all 8 channels down; however, when we use our IPTV/MoCA1.1 1.5GHz splitters (2-, 3-, 4-way) they will lock onto all 8 downstreams. Interestingly, if we use 2 1GHz splitters, it will lock on. And we have tried frequencies in the low 700s and in the upper 400s.

where to read about packet cable v6, MTA requesting with v6 data which spec to read, any information about this

This is the Multi-port Gigabit Ethernet Interface Module released in 2007.

Good morning / afternoon / evening,

We have a rather large lot used Cisco equipment available anybody interested ?

Please let me know and I will send you the details

Cheers,
Rob
7Digits

Hi all, just joined this forum after performing a search. I need someone who can repair CMTS, maybe Arris and some Cisco ubr product. Pretty old stuff but meets my needs and I'm out of spares. Any one you can recomend, please? I am told of an Engineer in Dallas who refurbs them, but no contact info.

Jack

Hello Forums members.
I've been fighting for over a week trying to provision a Motorola SBV5121 eMTA
The CM functions perfect, I have been able to login via telnet and the advanced web gui, but the eMTA never asks for the TFTP config file.

Greetings we can supply the following used Arris C4 equipment tested working with 90 day warranty for $68,995.00ea

1 x Arris C4-CHAS-00210 - C4 Chassis "Shell" pn: 710422

2 x Arris C4-SCM-02440W C4 - System Control Module 2 pn: 710397

7x Arris C4-CAM-20016W - 16D Cable Access Module (CAM) DOCSIS 3.0 pn: 722014

7x Arris C4-CAM-01122W - 2Dx12 U Cable Access Module (CAM) DOCSIS 2.0 pn: 710423

2x Arris C4-RCM-01000W - Router Control Module (RCM) pn: 722013

2x Arris C4-FCM-30640W - Fabric Control Module pn: 708367

We have Thomson TCM420 CM. I would like to know which is the newest firmware for it. And where can I download it.

hello many expert in our house.
Could help me about OID of SIP point?
in point below i needs to enable Call waiting via snmp MIBs(on *** line). can i do it?
i try many way to open and doesn't work.

Number Active Voice Lines = 2
Feature configuration for line 0:
Warm Line Number = (0 of 32 bytes)

Forwarding Number = (0 of 32 bytes)