Docsis chat

Dear forum,

is it possible to force a D3.0 Modem to use a specific Downstream Bonding Group available on a fiber node? I assume this would be vendor based, we primarily use Cisco EPC3212. Are you aware of any TLV or other config file options for Cisco? I know about generic "Downstream Frequency" setting in confilg file but read about problems with DS bonding in case you use it. Is it probably possible via DHCP vendor option 43?

thanks
Oliver

Hello,

Our Cable Modem and CPE have ip and it has ONLINE status in 'show cable modem' command in C3.
But it doesn't have any internet connection.

Hi,

we bought a ubr7246VXR with MC88 card on gray market to implement D3 on our network. But after 60 days, the card shut off. After investigation, i saw the licence was expired.

But if i read on cisco, the licence was not apply on MC88V card. How i can fix that asap and put it back on ?

thank you for your help.

UBR7246VXR_TDP#show license feature slot 3

HI all,

my first post so be gentle. I'm currently working with isc-dhcp server and docsis 3.0/emta gateway from arris and compal and I'm looking for a configuration variable to enable SNMP over lan.
I've searched the forum but cannot find anything concrete. is this going to be a private mib or is it a standard docsis feature?

cheers,
Jan

Hi All,
I using motorola BSR 64000 and configured lag interface for two interface gigaether but i don't know what is Cisco switch L2 configuration mode etherchannel? Pls help me.
Thanks!

Our C3 can't detect our CISCO cable modem(cisco DPC2100r3) but can detect and register INOVO Cable Modem(Model. IB-8120-W21).
Help.

Hello all

I have a 7246VXR with a MC28U it is configure on 256-QAM, but the graph chart no get more of 25mbps

any idea why dont work over 25mbps.

Thanks

Hi

In our ubr10k the downstreams are used indidually by docsis 1.1 and 2.0 modems

and are also used in wideband interface for docsis 3 modems

how can we monitor for congestion ?

we have 4 downstreams and 1 wideband interface

for example

ds1 is used at 50% by docsis2 modems
ds2 is used at 40% by docsis2 modems
ds3 is used at 30% by docsis2 modems
ds4 is used at 40% by docsis2 modems

I need ubr10k2-k9p6u2-mz.122-33.SCF5.bin и ubr10k-fpd-pkg.122-33.SCF5.pkg
Thanks in advance for your help.
serykh (at) mail.ru

Hi, my internet provider uses a HFC(hybrid coaxial cable) connection to my home, and as I understood my modem has a demultiplexer in there, what happens before I have a line radio frequency amplifier (I think so) outside of my house where all signal comes, after this they used a filter to hide some TV channels because its the cheapest internet+tv contract I made, what constantly is occurring this thing: