Docsis chat

Hi Guys,

I have some problem to using my ubr10k with mc20x20 card with 2 DTI Clock card. Each time i trying to get a modem boot, it almost come online (init)o and failling back offline.

Anyone have a ideal why ? I tried with use 8 DS channel bonding..below my config file.

thanks

Hello,

I have been working on a 16x4 configuration with a uBR10k in a lab using docsis 3.0 modems. The modems will connect to the cmts fine and the downstream will bond with 8 downstreams just fine. (8x4 modems) However, it appears that the modems will only bond with one upstream channel, and that channel will vary from modem to modem so its clear they're all being used.

Heres my configuration:

Dear All,

I am having a problem as described below, maybe someone experienced can help with this:

CMTS: Harmonic NSG EXO (16x4 D3.0)
Modems: Motorola SB5101i (D2.0) and SB6120 (D3.0)
IPTV STBs are connected to the ethernet ports of the modems for IPTV testing.

All the modems come online fine:

Hello!
We have a cable modem network and I am having trouble determining static address to CPE's (devices connected after cable modem).
Could determine static address to the cable modem but can not CPE´s.
Has anyone experienced this problem you can help me?

Thank you!

Hello everyone,

Had until now one Arris C3 and have migrated to a Cisco UBR7246X NPE-G2 and MC88V card. I'm using MTA arris and they need the dynamic service flow for voip.

I do not know if the problem of IOS or configuration but I can not activate this service and lost calls.

In addition, the debug system does not work and I do not send reports or by syslog nor console ...

I have the IOS:

BOOT variable = disk2: ubr7200p-jk9su2-mz.122-33.SCI3.bin, 1;
BOOTLDR variable = bootflash: ubr7200p-kboot-mz.122-33.SCD7.bin

I have two DHCP servers ... dhcp configured on sub-interface bundle1.1 work fine but dhcp on bundle1.2 not work....
when stopped bundle1.1 when interface 1.2 work... 2 sub interface not work the same time
this is my configuration bundle

I am trying to understand if there is a way i can add 2 flow spec profiles ?

Below are the flow spec parameter:
TSpec Parameters:
• Bucket Depth (b), bytes
• Bucket Rate (r), bytes/second
• Maximum
• Minimum Policed Unit (m), bytes
• Peak Rate (p), bytes/s

RSpec Parameters:
• Reserved Rate (R), bytes/second
• Slack Term (S), microseconds

Hi @ all,
I need a Cisco IOS image for my used Cisco uBR7246VXR NPE-G1 CMTS (bought from ebay).
If anybody is so kind please send me an actual image to my mail: nosilent@esdblog.org or an idea where to get an image (without service contract).

It would be very nice if it is one of these images:
ubr7200-jk9su2-mz.122-33.SCF5.bin (best)
ubr7200-jk9su2-mz.122-33.SCC7.bin (very good, or any other SCC release)

Thanks (if somebody can send me one of the listed IOS images)

Hi i have radiusmanager installed to manage docsis client but i want to redirect expired client to payment page .. Do you have any idea ho to do this?

Hi...!

I''ve a Motorola CMTS BSR2000. Right now is working as ROUTER.
Right now company will change network topology,
So , I need to setup BSR2000 as a BRIDGE.

Because I've no BSR2000 manual, ...somebody have bsr2000 manual?
...anybody can tell me how to setup it as BRIDGE?

Thank you