Docsis chat

I'm managing a UBR7246VXR chassis and I have a question. I want to install two UBR-MC88V, one of them configured with D3.0 (Annex B) and the other one with D3.0(Annex A). Is there any problem to do this or in the same chassis is mandatory to use the same annex in all the cards.

Hello,

Hi to all

I am having trouble configuring IPDR on a BSR 64000.
When i use this configuration :

ipdr enable
ipdr acksequenceinterval 64 ( default )
ipdr acktimeinterval 30 ( default )
ipdr keepaliveinterval 60 ( default )
ipdr collection-interval 15
ipdr export current-streaming-time
ipdr source-interface "my interface that reaches the collector"
ipdr collector "a.b.c.d" 4737 0 ( default ) - it takes as servicedefinition d2-samis

The file is generated in the collector, but not in the .xml format.

Hello,

I've recently obtained several BSR64k units with SRM4, TX32 and RX48 modules. Everything was running various software and bootrom versions. My research on the topic shows that I should be running 6.4.x.x software on all modules and bootrom 7.x.x.x.
As far as I can tell the latest v6 software should be 6.4.2.3 - is that correct? Can someone please share a link to a downloadable version of this fw?
Can someone also share the latest recommended bootrom in the v7 series?

I've also stumbled upon a POST error on several TX32 modules:

Hello!
I search for docsis config generator what allow more than 52000000 max rate down.
Of course for linux.

million thnaks

Hello to all!!

I am using 4 arris c3 cmts in one HFC plant. All cmts are managed by DMA SoftLab (radiusmanager with docsis support) .
All 4 CMTS are configured and working good i have no problems with configuration.
Lets assume:
CMTS1 410 MHz
CMTS2 418 MHz
CMTS3 426 MHz...etc

What is my problem?!!

How do I query the traffic of a wideband cable intereface per Downstream channel?
Another:
What is the rf-channel 0 traffic of the wideband-Cable?

Command line and oid.

CMTS: ubr10012 with mc20x20 cards
4DS and 4US per MAC domain

My questions:

Hi,

I wondering if anyone have the answers at my problem.

I have few modem TM from Arris on the second bundle i have able to boot few correctly (3 on each interface down with cm and tma config. As soon i have few other, all cable modem get reject(c) error.

I use 2 bundle, first for cable modem with PC and i use the TM on the second bundle (2) for VOIP only.

I'm using CNR 6.2 (Old CNR version but normally should work fine)

I attach the CM config file ubr10012.

I did some debug in log and there is the informations i got ;

This is more for the cable guys in the group... I recently gave away my return signal generator to someone who needed it.
it's a small battery operated two narrow frequency generator that you connect at the house and use a meter to check levels back to the node or headend.
I've got a project coming up and rather than ask to barrow it back, I wanted to buy two. problem is they are only available from China or Korea. anyone in the group know where I could get two? Yes, I checked ebay and they have one, but it's in China and can't wait for the slow boat to arrive.

What is the total 5/1/0 interface traffic?
(ubr10012, mc20v20)

Interface: 5/1/0

with show interfaces summary command:
Cable interafce TXBS: 27764000
Wideband-Cable TXBS:40142000
Integrated-Cable 0 TXBS: 1485000
Integrated-Cable 1 TXBS: 3365000
Integrated-Cable 2 TXBS: 21451000
Integrated-Cable 3 TXBS: 1452000

Cable= Intergated-Cable:0 + Integrated-Cable:1 + Integrated-Cable:2 + Integrated-Cable:3 ???

Total = Cable + Wideband-Cable ???