Docsis chat

I am tryng to provisioning the motorola SBV5121 MTA. It get IP but does not complets the provisioning! See the logs:

Telephony Provisioning status:

Telephony DHCP Completed
Telephony TFTP N/A
Telephony Provisioning State In Progress
Telephony Line 1 SIP Registration State
Telephony Line 2 SIP Registration State

Telephony Provisioning log:

We can offer the following configuration at $68,995.00 or provide a 24 - 60 month lease with payments ranging from $3,416.00 -$1552.00 per month. This bundle includes the following:

Arris C4

1 x Arris C4-CHAS-00210 - C4 Chassis "Shell" pn: 710422

2 x Arris C4-SCM-02440W C4 - System Control Module 2 pn: 710397

7x Arris C4-CAM-20016W - 16D Cable Access Module (CAM) DOCSIS 3.0 pn: 722014

7x Arris C4-CAM-01122W - 2Dx12 U Cable Access Module (CAM) DOCSIS 2.0 pn: 710423

2x Arris C4-RCM-01000W - Router Control Module (RCM) pn: 722013

We have Castlenet CBV704EW and we can’t get the MTA's working with Cisco UBR but with a Terrayon that work great.

We can receive calls and communicate when the Modem is connected to Terrayon or Cisco 7225 cmts.
The issue affect only when we try to perform a call from the EMTA Castlenet, he hears the DTF signals but doesn’t make the call.

There is the config file.

Hello ,,
When i login to my router by telnet and appear line Console>
i set mta , then i set config .
i need the command of show the sip information username and password , because when i set showconfig command the router tell me this command not found .

please can any one help me.

thank you

sorry if this subject flees a bit of discussion in this forum but I searched the internet and have not found the following:

I think almost everyone is catv operators. you know the login and password to access via web browser digicipher the DSR-4460 receiver?

Thank you.

Towards the end of the Cuda12000 platform life they began to support M-CMTS and the chassis required a new multiport gig card.

I'm looking to pick one of these up.

Anybody got one they wants to dispose of? Just looking for the card front and rear, not a whole chassis.

-Tom

¿Do you know if this process has generated some kind of disadvantages in
the functioning of the BSR2000. ?

Current image
CMTS#show boot
Boot location currently set to nvram:appImage_100P59TRCU.bin

CMTS#show version
Boot ROM : 1.0.35

New image: appImage_100P5914TRCU.bin

Process to copy the new image:
copy ftp: nvram:
After doing this process successfully:

Process to upgrade:
CMTS#boot system nvram: appImage_100P5914TRCU.

I hope your answers .. Thanks

Here are a couple typical loaded configurations we have available. We are open to breaking these up or adding to them.

Motorola BSR64000HD

Most of cable modem spec sheets I have do not list the maximum number of MAC addresses that can be learned by the cable modem.

Could someone confirm that the Motorola SB6121 supports a maximum of 32 CPEs?

In the Cablelabs L2VPN spec they talk of upping the size of the bridge table to 128 entries. Does anyone know any specific DOCSIS 3.0 modems that support 128 or more CPEs. I am looking for a basic cable modem; no router, no switch, no wifi...

Hi everybody,

I was wondering if anyone has worked with IPDR on CASA3200. I've used IPDR::Collection::Client from CPAN, but the problem is that it doesn't disconnect from CMTS so that immediately after session is finished starts newone, while data is on callback method is still processing. So we have many many clients running at the same time for the same CMTS, while data is still processing. You can not setup time-interval on CASA and that means that we have infinite loop.

If anyone has done it please let me know.

Thanks,
Janko