Docsis chat

Completely stranger to DOCSIS enviroment, I have question about IP addressing and perhaps how DHCP is setup in this network.

Hello

I am try to install a provisioning, and I get a CNR 6.0 licence, but I dont know the method to know the capacity of this license.

any body know how I can know it? or maybe can help me to get a licence to 7.0 or 8.0?

Thanks

I'm new in this Forum. My Problem is bringing up the MTA of a EPC2203.
The MTA makes his DISCOVER-Req and gets a OFFER. This is then repeatet endles.
The Spec says CM Opt 122.1=255.255.25.255 disables the IP-Check (all DHCP-Answers will be usable)

is there a command can put into config file to make docsis 3.0 modem into factory mode?
I am working on motorola cisco and arris modems.

I can not find any info around for docsis 3.0

Hello friends I am a small ISP in Chile, I bought a ARRIS CMTS 1000 which I configured according to information on the Internet, the problem is that I can not no cable modem can sync with the CMTS, I measured the output values ​​from the port downstream and test and are excellent, attached a video posted on youtube with the scheme.

Link video: http://www.youtube.com/watch?v=S7YfcoEAYEM
regards

Greetings we can supply the following used with 1 year warranty to end users:

Arris C4 CMTS

Greetings we can supply the following bundle used, tested working with 90day warranty.

If interested please call David DeVos at (585) 500-4071.

Thanks,
David
david.devos@surplusswitching.com
www.surplusswitching.com

I have a CMTS with CMTS I.P at 10.10.0.1 .
The primary gateway I.P Address is 10.10.4.1 255.255.255.0
The secondary gateway I.P Address is 10.10.8.1 255.255.255.0

how to make cisco ubr7246 bridge on Mikrotik to connect pppoe any example ?