Docsis chat

Guys, please give me a question. with the uBR10-MC5X20S linecard I can do channel bonding with the 5 downstream for a cable modem docsis 8x4 pick up at least 5 downstream channels ?

Thank you.

During eMTA device debugging and adjusting CM SNMP NonVol Settings, it seems I accidentally did set 'ResetDefault' for non-vol Dynamic Settings, which cause Resetting Dynamic Settings. In particular, docsDevSwFilename and docsDevSwServer now have default (wrong) values. I tried set correct values via SNMP MIB Browser, but settings not retained after reboot. Should these setting be applied directly via CM SNMP NonVol commands?

Anyone have any example modem configs for doing triple play with a gateway modem? I am doing some tests with the ARRIS TG3452 and am hoping to find a good starting point.

Hello everybody,
does maybe someone know what is the latest firmware version for Cisco EPC3208?
I have checked it and latest one that i have is e3200-ES-16-c1000r5593-140829c from September 2014.
If someone has any info about it, or any newer firmware version, that would be appreciated.

Thanks and kind regards

Best regards, I'm configuring bsr64000 but I do not get internet,
I have 2 modems one stays this state; online (pt) and the other one in; init (rc) but neither gets internet that could be?

Our arris C4 is redundant from 0 to 5.
However, even if 【debug slot 0 dump sparing data】 is executed, 3 to 5 information will not be displayed.

①Do you think the redundancy function is preserved?
Is it just a display problem?

②Is there a way to solve this problem?

I noticed that the display of 3 to 5 CPU utilization is wrong.
Does it concern this problem?

Short Question:
For the Arris DG3450 TG3452, and TM3402 modems, which variant of the firmware should be used? NA or D31?

Hello guys, I'm searching for mib files for Technicolor Cable Modem: Model CGA2121. Does anyone have, and can send me the SNMP MIB files? Mainly it's about wifi settings.
If so, please email me at kontotestowecsharp@gmail.com Thanks a lot! Dominik

Question:
when a modem is moved from one cable interface to another by the load balancing the modem always restarts, this must be the case or it is not normal
CMTS CISCO
cisco uBR7246VXR

Please I hope collaboration with the answer

Thank you

Hello All

I have a problem, with access SNMP the CMs to reset or get info, the file what I am using its public community, no BPI, and all CM are working but no this 2 models.

do you have any idea how I can check or do to get SNMP link communication from server and SNMP, others CM are working but no this models,

here a verbose from CMTS, please let me know, cause I dont have more ideas about what do to make it work.

Regards

CMTSX#show cable modem 20e5.645e.2685 verbose