Docsis chat

Hello all!

I'm quite new at the Docsys technology so please bare with me :) aka Docsys dummy ;)
(if you have a suggestion : docsys for dummy's. Please send me a intro or howto..)

network specs :

Nortel CMTS
os :
ARRIS MCNS Cable Modem Termination System
Software Version: 3.6.2

Provisioning :
Linux Debian distro
DHCP ( 2 pools, 1 for CM, 1 for CPE)
TFTPD
DNS
NNTP
MYSQL (DB with mac address + ip address CM network)

We're using a very default config with no BIN's!
Our basic config :
--
NetworkAcces = 1
ClassOfService =
ClassId = 1
MaxDownstreamRate = 1024000

Hi group

I wonder if someone could post a config file for DPC 2203. I have this device for testing the MTA part and the modem stays in online blinking which I think is not responding, so I think is a DOCSIS part issue.

Thanks in advanced.

Hello,

Is it possible to route a specific upstream from a same interface to a specific IPBX for the VOIP ?

Exemple :
I want that :
US0,US1 from cable interface3/0 use the IPBX 10.10.100.200
US2,US3 from cable interface3/0 use the IPBX 10.10.100.201

Thx for help

Up!

I have a Arris CMTS 1000, the question is i want to specify a secondary IP Address for CM traffic and CPE traffic or even just an Additional IP Address.

Your help is greatly appreciated

Hi everybody,

1- Date
I don't understand why i have to put an offset of 9 on the timezone in my configuration.
I am in France and normally the UTC/GMT clock is 12 when 14 in France. So the offset should be 2.

Here is the config i have :

clock timezone france 9
clock summer-time france-ete recurring last Sun Mar 2:00 last Sun Oct 3:00
clock calendar-valid

Here is the response of sh clock at 14:56 :
7246#sh clock
14:56:30.446 france-ete Mon Jun 7 2010.

2- Where can i find a free MRTG for CMTS and cable modem ?

Hi,
Have anyone configured traps on Arris 1500 and knows what must be configured besides standard access entry i nmaccess table?

After configuring access entry for traps, Arris 1000 sends traps and Arris 1500 doesn't.
[code] Access list
Index Status IP address IP mask Control Interfaces
---------- ---------- --------------- --------------- -------- -----------
1 active 192.168.X.X 255.255.255.255 read ether
2 active 192.168.X.X 255.255.255.255 read ether

Hi I've been studying up on the Cisco ubr7225 CLI. But there is one command which I can't really relate to even after reading the materials.

Whats is this "attribute" of 80000000 means? For example

cable upstream bonding-group 1
upstream 0
upstream 1
upstream 2
upstream 3
attributes 80000000

Cheers.

Hi!

Does anyone has a command-manual for BigBands Cuda-CMTS?

THX, Jacques

Where in the MIB tree is the 'set' for re-booting a modem via snmp? And what other criteria are required (if any) MIB-wise to do so?
I'm building a menu in SNMPc for modem management and it's getting cumbersome quickly -- mostly with tables and index entries that I'm not really interested in having to navigate through/around just to look at basic information and/or reboot a modem to update it, etc.
TIA as usual.

Poge

I have Motorola BSR 64000. I m trying to introduce PPPoE on my network.
I have two private networks (IP subnets). 1. User network behind BSR 64K that is on Cable network. The other network is my ISP setup. which includes my firewall . DHCP, DNS, TFTP etc.

Now i have kept PPPoE server on the ISP setup (2nd subnet). I m trying to dial from my CPE (behind BSR64K) to contact PPPoE server. My client sends PADI request. But i feel the request doesnt go through. Wireshark shows no response (NO PADO) from PPPoE server.

Now i have questions to above scenario: