Recommend a provisioning tool for Arris C3 | docsis.org

You are here

Recommend a provisioning tool for Arris C3

13 posts / 0 new
Last post
Huleboer
Recommend a provisioning tool for Arris C3

Hi there,

I'm faily new to this cable business, therefore please bare with me if I make stupid questions :-)

I have a small cable network with 800 TV clients and I want to implement Internet in the network using a Arris C3 CMTS.

For this I'm looking for a system to make provisioning of the cable modems, make new clients and to generate the files for the cable modems.
We will not have more than max. 150 customers.

Can you recommend some kind of software for this or a provider who can deliver it?

Best Regards
K

uscallesen
With only 150 customers I

With only 150 customers I think all the commercial solutions available for Docsis provisioning are out of the picture - unless you can make a really good deal.

psmit
Agreed

I'd build a Linux box and use ISC DHCPD for modem provisioning. There are a few free config file editors/encoders floating around as well, with the most popular being docsis-0.9.4 for Linux. That said, it doesn't play nice on certain distros, so you may want to search the threads here for advice, tips, and tricks before settling on your favorite flavor.

Poge

emkowale
You get what you pay for

Hi,

Free isn't always better. Pay a little money up front and have one written for you so you can relax later.

emkowale

frnkblk
Go manual

With so few customers, rolling a few configuration files by hand would be very doable.

m4sh
Mayby try this:
redpeppers
DirectlinkAdmin

Check out http://www.directlinkadmin.com

Where there's a wire there's a way.

qnox
affordable provisioning system

Hello!

I can provide you very powerful and also very affordable solution curently used by multiple cable operators, from 100 to 3500 subscribers. I can send you some documents and even prepare demo to evaluate. If you interested please let me know.

Huleboer
Interrested !

Hi there, yes I could be interrested in this, how do we go forward?

Regards

qnox
affordable provisioning and monitoring system

to Huleboer - if you intrested in our provisioning solution please feel free to contact at support canet pl

JimF
I have been using Blonder

I have been using Blonder Tongue CMTS's and FOCS provisioning software for over 5 years. Are you set on the Arris C3? I could set you up with everything you need for a fraction of the cost of the Arris.

lancey
Hi, We are running a similar

Hi,
We are running a similar setup in a small town in Bulgaria, and have set us up with a self-made provisioning system. If you need an affordable, supported solution, you can contact me at my e-mail - root [at] net1 [dot] cc

-----------------------------------
http://www.net1.cc

arivera
Recommend a provisioning tool for Arris C3

If you are still searching for a solution to help facilitate Provisioning, check us out www.zcorum.com. ZCorum also provides a Diagnostic Software called TruVizion (www.truvizion.com) which is a software that provides analytical data from your CMTS, Ports, and Modems in your network. ZCorum is a FULL Broadband Solutions company so we can help with Email Hosting, Network Monitoring as well as End User Technical Support.

Alex Rivera
ZCorum | Product Sales Manager
arivera@zcorum.com
Toll Free - 1.800.909.9441 x5562

Log in or register to post comments