Old tuning | docsis.org

You are here

Old tuning

1 post / 0 new
serykh
Old tuning

Previously, we used I-CMTS Cisco uBR7246VXR+MC28U.
In the CMTS settings was a small tuning DS
cable default-phy-burst 0
In the CM DOCSIS 2.0 configuration file as well
MaxConcatenatedBurst 4000;
MaxTrafficBurst 4000;
Now we use M-CMTS Cisco uBR10012+MC5x20H+DS SPA+Edge QAM, with different CM DOCSIS 2.0/3.0.
But in mc5x20h settings and cm configs these settings remained.
Does it make sense to keep these settings? Typically, Cisco has the best default settings for most situations.
In DOCSIS 2.0, these settings were used to achieve maximum peak speeds, but had a negative effect on delays in games, etc.