Hello everyone,
I explain my problem.
I work on a Arris C4 CMTS and I want to provisionning my Cable Modem in IPv6.
I've setup a DHCPv6 server that works and here is a part of the conf of the CMTS for the "CM-IP Provisioning" :
interface cable-mac 1.0
description "CM IP address"
ipv6 enable
ipv6 address xxxx:xxxx/64
ipv6 dhcp relay destination xxxx:xxxx:xxxx:xxxx:...
ipv6 nd managed-config-flag
ipv6 nd other-config-flag
ipv6 nd ra interval 5 3
ipv6 no nd ra suppress
exit
So I have the "CM IPv6" is displayed for my modem with the command "show cable modem" - But I don't know at all how to make the "CPE-IPv6".
If someone could help me? Thank you.
Have a look at our IPv6 DOCSIS Provisioning
Url: chaos.undo.it:5005
User: Guest
Password: guest
contact me if you need additional info : enochd@weird-solutions.com
cheers
Hi,
I assume that you have connected something like a PC with IPv6-capable OS and trying to get it to do the IPv6 autoconfiguration through the CM. Since CMs work as (half)bridges, the CMTS is what should provide the IPv6 configuration (NDP/DHCPv6) to CPE.
This will probably require additional config of the C4; not sure if I can help here.