Inbound voice Delay | docsis.org

You are here

Inbound voice Delay

2 posts / 0 new
Last post
Anonymous (not verified)
Inbound voice Delay

We are currently running a form of DQOS-lite (-KDC server and BPI). We have a Ubr10K, Cedarpoint switch, and end to end QOS with Dynamic service flows created using Moto 5220's. We are currently experiencing an issue where we have delay with incoming calls. on-net to on-net and off-net to on-net. What happens is the person answering the phone says hello a few times before the far end can hear them pick up. The mta user hears a click like the connection establishes then everything is fine. I suspect this to be a moto issue and was wondering if anyone has had this issue before and if maybe you have a config file to look at as maybe I have missed a setting for offhook, delay or echo settings.

Thanks,

Jeremy

DocsisAdmin
Inbound voice Delay

I had that same issue when there was a firewall issue between my cmts & call manager/pep servers. It was apparent when I checked cops connections within the cmts and saw no active sessions. The calls would eventually set up but be running on the primary data service flows with no QoS.

Log in or register to post comments