UBR10k | docsis.org

You are here

UBR10k

3 posts / 0 new
Last post
Cody7172
UBR10k

Good afternoon!

There is an unconfigured ubr10k.
Its configuration has the following:

controller Modular-Cable 1/1/0
rf-channel 0 cable downstream channel-id 193
rf-channel 1 cable downstream channel-id 194
rf-channel 2 cable downstream channel-id 195
rf-channel 3 cable downstream channel-id 196
rf-channel 4 cable downstream channel-id 197
rf-channel 5 cable downstream channel-id 198
rf-channel 6 cable downstream channel-id 199
rf-channel 7 cable downstream channel-id 200
rf-channel 8 cable downstream channel-id 201
rf-channel 9 cable downstream channel-id 202
rf-channel 10 cable downstream channel-id 203
rf-channel 11 cable downstream channel-id 204
rf-channel 12 cable downstream channel-id 205
rf-channel 13 cable downstream channel-id 206
rf-channel 14 cable downstream channel-id 207
rf-channel 15 cable downstream channel-id 208
rf-channel 16 cable downstream channel-id 209
rf-channel 17 cable downstream channel-id 210
rf-channel 18 cable downstream channel-id 211
rf-channel 19 cable downstream channel-id 212
rf-channel 20 cable downstream channel-id 213
rf-channel 21 cable downstream channel-id 214
rf-channel 22 cable downstream channel-id 215
rf-channel 23 cable downstream channel-id 216

Where does this id come from and what controller Modular-Cable 1/1/0 is responsible for? Also i can’t remove it, ubr says "% Cannot remove controllers this way"

mbowe
It relates to SPA-24XDS-SFP

It relates to SPA-24XDS-SFP card in SIP-600 slot 1/1

To remove that config stanza, you would have to :
1/ Physically remove the SPA card (if not already done)
then
2/ Remove "card 1/1 24rfchannel-spa-1" from your config (ie "no card 1/1 24rfchannel-spa-1")

Cody7172
mbowe, THANKS! It works

mbowe, THANKS! It works

Log in or register to post comments