I am Looking for FIRMWARE for Motorola (GI) OM1000 | docsis.org

You are here

I am Looking for FIRMWARE for Motorola (GI) OM1000

3 posts / 0 new
Last post
jimjiang2
I am Looking for FIRMWARE for Motorola (GI) OM1000

Our OM1000's Firmware was deleted by an accident.
It can only boot to Wxworks boot, no operate software can find.
And new I am Looking for FIRMWARE for Motorola (GI) OM1000 ;

Please help!......thank you all.

Below is the booting log:
=====================================================
CPU: General Instrument GI360
Version: 5.2
BSP version: 1.0
Creation date: Fri Jan 16 13:48:55 EST 1998
Press any key to stop auto-boot... 7 6 5 4 3 2 1 0
auto-booting...

boot device : qu
processor number : 0
host name : bootHost
file name : ldd/29/om1000.fof
inet on ethernet (e) : 10.253.203.148:fffffff0
host inet (h) : 10.253.203.149
gateway inet (g) : 10.253.203.1
user (u) : target
ftp password (pw) : 111
flags (f) : 0xc0
target name (tn) : vxTarget
Attaching network interface qu0... sys360EnetDisable: unit 0, scc 1
done.
sys360EnetAddrGet: unit 0, scc 1
MAC addr of SCC1 is: 00:20:40:00:73:4a
Getting boot parameters via network interface qu0sys360EnetAddrGet: unit 0, scc 1
..Bootp Timeout. (10 seconds)

COP360: Booting from Flash ...
qu(0,0)bootHost:ldd/29/om1000.fof e=10.253.203.148:fffffff0 h=10.253.203.149 g=10.253.203.1 u=target pw=111 f=0xc0 tn=vxTarget
Attaching network interface lo0... done.
Can't load boot file!!
sys360EnetDisable: unit
COP360 booting...
File system /config Loaded
File system /boot Not found... new one created
Use the FCF from Boot-Block.
sys360EnetAddrGet: unit 0, scc 1
MAC addr of SCC1 is: 00:20:40:00:73:4a
sys360EnetAddrGet: unit 1, scc 2
MAC addr of SCC2 is: 00:20:40:ff:73:4a
Use:qu(0,0)bootHost:ldd/29/om1000.fof e=10.253.203.148:fffffff0 h=10.253.203.149 g=10.253.203.1 u=target pw=111 f=0xc0 tn=vxTarget
[VxWorks Boot]:

jimjiang2
any one , please help , send

any one , please help , send me the firmware to emal: jimjiang4@163.com

cmcaldas
try http://www.avsforum.com

try http://www.avsforum.com/forum/25-hdtv-technical/1421211-catv-head-end.html
this site is for cmts / cable modems for the most part, sorry I don't have what you need

Log in or register to post comments