Cisco UBR7246VXR + 1x UBR-MC88V in annex A + 1x UBR-MC88V in annex B | docsis.org

You are here

Cisco UBR7246VXR + 1x UBR-MC88V in annex A + 1x UBR-MC88V in annex B

5 posts / 0 new
Last post
BTEST
Cisco UBR7246VXR + 1x UBR-MC88V in annex A + 1x UBR-MC88V in annex B

I'm managing a UBR7246VXR chassis and I have a question. I want to install two UBR-MC88V, one of them configured with D3.0 (Annex B) and the other one with D3.0(Annex A). Is there any problem to do this or in the same chassis is mandatory to use the same annex in all the cards.

ScratOSS (not verified)
same annex for whole chassis

same annex for whole chassis

cutandpaste
Do It In Lab Envioronment

So did you try this in a lab environment yet? I am interested to hear the result of this.

TadeuszCiesielski (not verified)
You cannot do that. IOS will

You cannot do that. IOS will not allow for such configuration.

ScratOS
This cannot be done. ubr will

This cannot be done. ubr will not allow this

Log in or register to post comments