FIRMWARE UPGRADE - CVC VALIDATION FAILURE | docsis.org

You are here

FIRMWARE UPGRADE - CVC VALIDATION FAILURE

14 posts / 0 new
Last post
Anonymous (not verified)
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

Hi,

I am trying to do an Image upgrade for a DOCSIS 1.1 Cable modem, I have set the following information in the config file for the cable modem to download the new image after reboot.

TFTP Server 10.1.1.1

Software FileName : sfot_189.img

After rebooting the modem the cable modem downloads the config file and comes online , but fails to download the firmware mentioned in the config file , instead it trows the following error.

Configuration File CVC Validation Failure.

Can someone help me sorting out this firmware upgrade issue.

wittmann
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

Hello prasad,

you need the certification from the manufactor of the cable modem. This CVC must be in into the configfile.

Which cable modem are you using?

Regards,

Peter

hinzoo
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

Maybe U can use TLV38 to disable cvc validation.

Anonymous (not verified)
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

Thanks for the reply,

Could you please provide the steps for disabling the CVC, I havent used this feature earlier.

Anonymous (not verified)
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

Hello Prasad,
You are getting this error because the CM verifies the MFG CVC before it starts to download the upgrade image on to it. In your case either the MFG CVC tlv is missing in the config file or an improper MFG CVC is added into the CM config file.
You can do the following:
1) Get the correct MFG CVC for your CM. This CVC is given by the DOCSIS root CA and is manufacturer specific. IN your case for the test purpose there will be some CVC used by your CM.
2) Once you have the correct CVC file, the CM can validate it and upgrade the firmware on the modem.

Thanks
Pradeep

hypertension (not verified)
adding the cvc to the firmware

If you have the CVC how could you sign/add it to the firmware?

hinzoo
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

Use VendorSpecific and inside parenthesis put GenericTLV TlvCode 38 TlvLength 1 TlvValue 0x01 - actual syntax depands on Your Docsis compiler.

Anonymous (not verified)
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

I have got the correct CVC from the manufacturer but still it shows the same error.
Can i bypass the CVC validation before image download

dpecile
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

What firmware are you trying to upload, I was able to upload a new firmware to ours c550A, but when I try to change to eurodocsis. I am having the same errors. After talk with the arris people, they say is because the 550a is incompatible with the firmware for the 550b. May be could be your problem ?

hinzoo
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

I'll tell again. Use VSIF TLV38.

dpecile
FIRMWARE UPGRADE - CVC VALIDATION FAILURE

I already try with tlv 38, without any luck to reflash my 550a to 550b.

0011 (not verified)
Re:
zombo09
Fantastic post. Bookmarked

Fantastic post. Bookmarked this site and emailed it to a few friends, your post was that great, keep it up.

Leon07
Configuration File CVC Validation Failure

Good morning,
I was reading this comment becouse I have a similar issue. But in my case I have SA CM DPC2203 and I have problem whit e new group of CM's, the first group, all of this CM I can upgrade it, but on the second group of the same model have an error whit "Configuration File CVC Validation Failure TLV-11 - unrecognized OID"
How is this possible if is the same model?

Regards,
Saludos desde Argentina!
LeonVII

Log in or register to post comments