Job Postings

Hi,
Few years ago I bought few cable modems including Arris TM602g units. I never tried the idea of provide telephone service until now.
I'm having trouble provisioning the eMTA side, and I think is because I’m trying to provisioning SIP on those cable modems.
Seems that the cable modem firmware has to be change to make it work on SIP provisioning and that part has to be provide by Arris itself.
I bought it to an Arris re-seller. I want to know if you can help me getting this eMTA Firmware thing on the way.

We sell CMTS units and perform remote DOCSIS installations. If you are available full time or part time for different projects from time to time, please reply tp modemland@gmail.com. Please indicate your knowledge in configuring the following systems:

Cisco uBR
ARRIS C3/C4
CASA
Motorola

Thank you.

Current openings available:
* LTE Protocol Development Engineer
* Software Engineers, Routing/IP Protocols
* Software Engineers, Kernel
* Software Quality Assurance Engineers
* Systems Engineers, U.S. Regions
* Technical Support Engineers
* Escalation Engineers
Details available at http://www.casasystems.com/
To Apply: Send resumes to jobs@casa-systems.com

I am building an eMTA/CM test software and need some help with eMTA boot.

Basically I am looking for help to setup my dhcp config file with option 122 that will allow me to boot any generic eMTA including the following tasks:

Generate a config file
Download config file to eMTA
Get a dial tone
Generate a test call from line1 to line2 using TCL

My setup includes a bunch of clients, centos server, and Arris C3 CMTS

Please contact me if you are interested in this short term, part time opportunity.

I am tryng to provisioning the motorola SBV5121 MTA. It get IP but does not complets the provisioning! See the logs:

Telephony Provisioning status:

Telephony DHCP Completed
Telephony TFTP N/A
Telephony Provisioning State In Progress
Telephony Line 1 SIP Registration State
Telephony Line 2 SIP Registration State

Telephony Provisioning log:

Hello friends, somebody have the comand list for config a CMTS motorola???
excuse me if I write bad the question becouse my lenguage is Spanish :)

Hello All,

I have a couple of small MDU CATV plants in Las Cruces, NM and from time to time may need someone who is qualified who can do any/all of the following:

Balance a Head End
Swap out a CMTS
Balance a CATV plant (I use all SA 750Mhz stuff)
Repair a cut hard line
Swap out a hard line power supply
Swap out a modulator
Etc…

hi all, I have been investigating how to implement network telephony hfc, and before continuing would like to consult whether it would be feasible to implement with the devices I own. They are:

CMTS

Seeking a docsis engineer to consult on a cisco ubr10k.

Looking for
review of current CMTS config/load balancing/qos
review of current CM config files
revised cmts config
revised CM config files

Mixture of D2.x and D3.0 interfaces.

D3.0 running 4x4 bonding with EMTA's for voice.

CPE is Arris/Cisco for D3.0 Motorola/Terayon for D2.x

Hello All!
i using the cable modem Motorola Sb5101, it install driver usb for win 7 x86 ok but not install for win 7 x64. i don't have driver for win 7 x64, can you sent or share for me it.
Thanks so much.