Dear community,
I am considering a CMTS upgrade, specifically looking to move to a Casa C40G. Based on the datasheets, I haven't been able to fully understand the configurability of the DS8x96 downstream card.Here is what I would like to achieve: 16 unique SC-QAM channels on each of the 8 ports, plus a shared OFDM block that is split across all 8 ports. Alternatively, sharing two OFDM blocks across 4 ports each would also work for me.Is the DS8x96 card capable of this specific configuration?Any insights or configuration examples would be greatly appreciated. Thanks in advance!
It has been a long time, but if I remember right OFDM is split into 2 groups with four ports each, each group can be up to 96 MHz. but using this card strands you on software release 7.2 at the most which is about 8 years old now. The shared-ofdm is very awkward to configure.
If you can I would highly recommend just using a 8x192 card, the cost differential should be pretty minimal but the capabilities are very different. 8x192 can do 48/64 SC-Qams + 2 OFDM 192 MHz per port. It is also compatible with newer 8.x releases (8.x is not compatible with DS 8x96, US 16x4 or SMM 2x10)
Thank you very much for both the information and the advice!