So have been battling to get modem to come online. Currently modem goes from init(t) to init(o). I have tried debugging the 10k and don't see a lot of information. This is the running config. Maybe someone can see something I don't.
cisco10k-1#show run
Building configuration...
Current configuration : 23464 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname petalumamwr10k-1
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$IM1H$NKvIb6Hdm0ng1q0aDrhaR.
enable password *****
!
no aaa new-model
facility-alarm outlet-temperature major 58
facility-alarm outlet-temperature minor 48
facility-alarm intake-temperature major 51
facility-alarm intake-temperature minor 41
!
!
card 1/1 2cable-dtcc
card 2/1 2cable-dtcc
card 3 4jacket-1
card 3/0 SPA-5X1GE-V2
card 8/0 ubr10k-clc-mc2020v license 20X20
card 8/1 ubr10k-clc-mc2020v license 20X20
cable admission-control preempt priority-voice
!
!
!
!
no cable qos permission create
no cable qos permission update
cable qos permission modems
!
cable load-balance docsis-enable
cable load-balance docsis30-enable
!
cable load-balance docsis-group 5000 index 81
downstream Integrated-Cable 8/0/0 rf-channel 0-3
upstream Cable8/0/0 0-1
init-tech-list 1-4 ucc
!
cable load-balance docsis-group 5001 index 82
downstream Integrated-Cable 8/0/0 rf-channel 0-3
upstream Cable8/0/0 2-3
init-tech-list 1-4 ucc
!
!
ip subnet-zero
no ip routing
!
!
!
!
!
!
!
redundancy
mode sso
!
controller Integrated-Cable 8/0/0
rf-channel 0 cable downstream channel-id 145
rf-channel 0 frequency 441000000 annex B modulation 64qam interleave 32
rf-channel 0 rf-power 52.0
no rf-channel 0 rf-shutdown
rf-channel 1 cable downstream channel-id 146
rf-channel 1 frequency 447000000 annex B modulation 64qam interleave 32
rf-channel 1 rf-power 52.0
no rf-channel 1 rf-shutdown
rf-channel 2 cable downstream channel-id 147
rf-channel 2 frequency 453000000 annex B modulation 64qam interleave 32
rf-channel 2 rf-power 52.0
no rf-channel 2 rf-shutdown
rf-channel 3 cable downstream channel-id 148
rf-channel 3 frequency 459000000 annex B modulation 64qam interleave 32
rf-channel 3 rf-power 52.0
no rf-channel 3 rf-shutdown
!
!
!
!
!
!
!
!
interface Port-channel1
ip address 10.10.10.2 255.255.255.248
--More-- no negotiation auto
!
interface FastEthernet0/0/0
ip address 192.168.88.4 255.255.255.0
no ip route-cache
media-type rj45
speed auto
full-duplex
!
interface GigabitEthernet3/0/0
no ip address
negotiation auto
channel-group 1
!
!
interface Cable8/0/0
downstream Integrated-Cable 8/0/0 rf-channel 0-3 upstream 0-3
cable mtc-mode
cable cm-status enable 3 6-10
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream bonding-group 1
upstream 0
upstream 1
attributes 80000000
cable upstream 0 connector 0
--More-- cable upstream 0 frequency 32000000
cable upstream 0 channel-width 1600000 1600000
cable upstream 0 docsis-mode tdma
cable upstream 0 minislot-size 4
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 21
no cable upstream 0 shutdown
cable upstream 1 connector 1
cable upstream 1 channel-width 1600000 1600000
cable upstream 1 docsis-mode tdma
cable upstream 1 minislot-size 4
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 21
no cable upstream 1 shutdown
no cable upstream 2 connector
cable upstream 2 channel-width 1600000 1600000
cable upstream 2 docsis-mode tdma
cable upstream 2 minislot-size 4
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 21
no cable upstream 2 shutdown
no cable upstream 3 connector
cable upstream 3 channel-width 1600000 1600000
cable upstream 3 docsis-mode tdma
cable upstream 3 minislot-size 4
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 21
no cable upstream 3 shutdown
!
interface Integrated-Cable8/0/0:0
cable bundle 1
cable rf-bandwidth-percent 90
interface Integrated-Cable8/0/0:1
cable bundle 1
cable rf-bandwidth-percent 90
!
interface Integrated-Cable8/0/0:2
cable bundle 1
cable rf-bandwidth-percent 90
!
interface Integrated-Cable8/0/0:3
cable bundle 1
cable rf-bandwidth-percent 90
!
interface Wideband-Cable8/0/0:0
description ** 8x wideband (mac domain1): 8 ch down bond for data (4 prim plus 4 shared)
cable bundle 1
cable rf-channel 0 bandwidth-percent 1 remaining ratio 100
cable rf-channel 1 bandwidth-percent 1 remaining ratio 100
cable rf-channel 2 bandwidth-percent 1 remaining ratio 100
cable rf-channel 3 bandwidth-percent 1 remaining ratio 100
cable rf-channel controller 4 channel 0 bandwidth-percent 1 remaining ratio 100
cable rf-channel controller 4 channel 1 bandwidth-percent 1 remaining ratio 100
cable rf-channel controller 4 channel 2 bandwidth-percent 1 remaining ratio 100
cable rf-channel controller 4 channel 3 bandwidth-percent 1 remaining ratio 100
!
interface Wideband-Cable8/0/0:1
cable bundle 1
cable rf-channel 0 bandwidth-percent 1 remaining ratio 100
cable rf-channel 1 bandwidth-percent 1 remaining ratio 100
cable rf-channel 2 bandwidth-percent 1 remaining ratio 100
cable rf-channel 3 bandwidth-percent 1 remaining ratio 100
!
interface Wideband-Cable8/0/0:2
cable bundle 1
cable bonding-group-secondary
cable rf-channel controller 4 channel 0 bandwidth-percent 80 remaining ratio 100
cable rf-channel controller 4 channel 1 bandwidth-percent 80 remaining ratio 100
cable rf-channel controller 4 channel 2 bandwidth-percent 80 remaining ratio 100
cable rf-channel controller 4 channel 3 bandwidth-percent 80 remaining ratio 100
!
interface Wideband-Cable8/0/0:3
cable bundle 1
!
interface Wideband-Cable8/0/0:4
cable bundle 1
!
!
interface Bundle1
ip address 172.10.0.1 255.255.252.0 secondary
ip address 10.10.0.1 255.255.252.0
cable arp filter request-send 3 2
cable arp filter reply-accept 3 2
cable dhcp-parse option-43
cable dhcp-giaddr policy
cable helper-address 192.168.88.5
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.88.1
!
!
no ip http server
no ip http secure-server
!
!
logging cmts ipc-cable log-level errors
logging cmts sea syslog-level errors
access-list 101 permit ip host 10.10.0.1 host 192.168.88.5
access-list 101 permit ip host 192.168.88.5 host 10.10.0.1
cpd cr-id 1
nls resp-timeout 1
!
snmp-server community public RO
snmp-server manager
!
!
control-plane
!
!
line con 0
exec-timeout 0 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password bbeadmin1
login
!
scheduler isr-watchdog
no process cpu extended
no process cpu autoprofile hog
!
cable fiber-node 11
description ** MAC domain 1 part (2 upstreams)
downstream Integrated-Cable 8/0/0 rf-channel 0-3
downstream Integrated-Cable 8/0/1 rf-channel 0-3
upstream Cable 8/0 connector 0-1
!
cable fiber-node 12
downstream Integrated-Cable 8/0/0 rf-channel 0-3
downstream Integrated-Cable 8/0/1 rf-channel 0-3
upstream Cable 8/0 connector 2-3
!
end
I'm not a Cisco expert, but thinking something else is failing here. the modem ranges and moves onto the dhcp server to get it's information and tftp server info. from the modem gateway or source address, can you ping the tftp server and dhcp server? docsis shared secret match what's on the modem file? modem log, what does it say is failing? 9/10 times tod isn't really needed or a show stopper, why I'm asking about the other possible issues because the show cable modem command goes quick as the modems move through it's registration and easy to miss. do you see the file sent to modem from the tftp server via the tftp server log?
Carl
INIT(t) is Time of Day exchange failure. Check if the IP from DHCP Offer for ToD has a ToD server running. If not, you can enable ToD server on the CMTS itself and change the DHCP Offer Option.
Thanks guys. I am going to try running the TOD on the cmts itself. Found the cisco paper on it. Let you guys know the results on this.
make sure your times are right. If the cmts time and the dhcp server time are too far apart, it won't allow it to finish registering.
So I just got on site. Here thanks for the input. I tried a different modem and yeah same thing is happening. I am about to check the time on both the TOD server and the cmts. Also I was pointed to this article on shared secret. http://www.cisco.com/c/en/us/td/docs/cable/cmts/feature/ubrdmic.html#wp1... . I started reviewing it but I don't think I have this set.
Thanks guys
So I went through this thing and excluded a modem from the shared secret using the cable dynamic-secret exclude modem . The modem is still not downloading the tftp file.
The modem does show itself moving on from TOD and then attempting to download the file however it never succeeds. I have downloaded a tftp file from the server to the cmts using copy tftp flash command and it succeeded. Im pretty stumpped on what the heck is going on. Anything further you guys can suggest would be appreciated.
Look at the tftp server logs and see if it shows an error on the transfer, or any evidence that that modem tried to download the file. (verify file existance, spelling, location, etc)
is it just one modem, or all modems, or is this a new launch?
Sorry to point something out you may checked, but from the tftp server, can it ping the modem gateway?
Thought is it might be different from the dhcp server and may need a route?
Carl
Hey Guys,
Here it is so far. I am able to ping from cmts bundle to tftp server. Our server is all in one btw. From the server I can ping the cable gateway as well. Which is why I am stumped on what can cause the modem not to download the file.
Thanks
Yeah this is a new launch.
Guys,
I may have found the issue. The gigabit interfaces was not working. So I was routing everything through the fastethernet on the pre one of the vendors told me that tftp wont work if I am routing through the pre. Anyone know if this is true?
Thanks
the fastethernet port is for management only, so no, I don't think it'll route thru that interface.
Hi
So we ended up fixing the issue where the spa interfaces weren't working. After a lot of pulling and reseating and wiping the configuration the cmts started to allow traffic through the ports. We got a basic config inside of it now and have got the modem to init(o).
I see the modem requesting the file however it doesn't seem to take it. Could it be that the file is incorrect or needs to be specific? I have used this file on a casa and it works great. If anyone has a working file that I can work from that would be great.
Thanks everyone!
NetworkAccess = 1
SnmpMib = docsDevNmAccessIp.1 0.0.0.0
SnmpMib = docsDevNmAccessIpMask.1 0.0.0.0
SnmpMib = docsDevNmAccessCommunity.1 "public"
SnmpMib = docsDevNmAccessControl.1 read
SnmpMib = docsDevNmAccessInterfaces.1 hexstr: 40
SnmpMib = docsDevNmAccessStatus.1 createAndGo
UnknownOID = 1.3.6.1.4.1.1166.1.19.3.1.25.0 HexValueTLV = 020101
UnknownOID = 1.3.6.1.4.1.1166.1.19.3.6.3.0.84 HexValueTLV = 040131
BaselinePrivacy =
AuthorizeWaitTimeout = 10
ReauthorizeWaitTimeout = 10
KekGraceTime = 600
OpWaitTimeout = 10
RekeyWaitTimeout = 10
TekGraceTime = 3600
AuthorizeRejectWaitTimeout = 60
SAMapWaitTimeout = 10
SAMapMaxRetries = 10
MaxCpeAllowed = 9
UpstreamServiceFlow =
SfReference = 1
SfQosSetType = 7
SfTrafficPriority = 5
SfMaxTrafficBurst = 20000
SfMaxConcatBurst = 10000
SfSchedulingType = 2
DownstreamServiceFlow =
SfReference = 5
SfQosSetType = 7
SfTrafficPriority = 6
SfMaxTrafficBurst = 30000
PrivacyEnable = 1
ManufacturerCVC = hexstr: 30.82.03.A1.30.82.02.89.A0.03.02.01.02.02.10.68.42.CB.72.AC.75.DD.BE.CF.17.A4.55.F7.9A.19.E1.30.0D.06.09.2A.86.48.86.F7.0D.01.01.05.05.00.30.81.97.31.0B.30.09.06.03.55.04.06.13.02.55.53.31.39.30.37.06.03.55.04.0A.13.30.44.61.74.61.20.4F.76.65.72.20.43.61.62.6C.65.20.53.65.72.76.69.63.65.20.49.6E.74.65.72.66.61.63.65.20.53.70.65.63.69.66.69.63.61.74.69.6F.6E.73.31.15.30.13.06.03.55.04.0B.13.0C.43.61.62.6C.65.20.4D.6F.64.65.6D.73.31.36.30.34.06.03.55.04.03.13.2D.44.4F.43.53.49.53.20.43.61.62.6C.65.20.4D.6F.64.65.6D.20.52.6F.6F.74.20.43.65.72.74.69.66.69.63.61.74.65.20.41.75.74.68.6F.72.69.74.79.30.1E.17.0D.30.31.30.37.31.31.30.30.30.30.30.30.5A.17.0D.32.31.30.33.30.32.32.33.35.39.35.39.5A.30.65.31.0B.30.09.06.03.55.04.06.13.02.55.53.31.1D.30.1B.06.03.55.04.0A.13.14.4D.6F.74.6F.72.6F.6C.61.20.43.6F.72.70.6F.72.61.74.69.6F.6E.31.0F.30.0D.06.03.55.04.0B.13.06.44.4F.43.53.49.53.31.26.30.24.06.03.55.04.03.13.1D.43.6F.64.65.20.56.65.72.69.66.69.63.61.74.69.6F.6E.20.43.65.72.74.69.66.69.63.61.74.65.30.82.01.22.30.0D.06.09.2A.86.48.86.F7.0D.01.01.01.05.00.03.82.01.0F.00.30.82.01.0A.02.82.01.01.00.A6.37.F0.D3.AC.74.D4.CA.A5.AA.90.00.42.C4.9A.C0.B0.83.87.D3.F7.FB.92.81.21.B3.34.E1.59.4A.59.AF.73.E9.4A.C8.12.A5.F5.9D.60.4E.F6.24.D5.6D.DA.01.41.14.43.A9.0F.F5.48.E9.9E.E2.32.BD.66.53.4E.0C.65.89.9D.06.3A.F5.DB.BD.7D.9B.A9.36.1B.0A.D2.14.96.BA.5E.6D.79.34.97.69.50.DA.7D.C6.89.91.8C.81.9F.F5.97.7A.5A.24.01.D3.F2.0F.EB.E2.74.9C.AC.29.65.A4.FB.D5.C0.51.13.C4.D2.DB.6E.8E.C4.58.07.90.6F.1B.F3.1A.CC.A4.FD.8D.8E.E9.13.DE.27.BF.FD.9B.EA.D2.27.DC.2F.F4.EF.89.86.8A.B3.B7.35.7F.3F.19.5D.A6.2A.77.98.39.ED.3D.CE.DF.21.83.70.C2.C1.10.7F.60.D5.9A.D3.49.4A.51.6E.56.38.07.D1.3B.5D.F9.22.52.28.31.3A.4C.53.F0.FE.1B.99.8B.01.C4.A5.EE.17.15.0E.F7.2D.28.6C.F7.1E.5A.0F.E6.83.0A.5B.E0.82.FE.77.4F.C0.51.B8.31.42.D3.52.78.54.41.4E.12.D5.A6.55.7F.B8.38.DC.D0.3F.B4.0A.10.68.6D.4E.49.02.03.01.00.01.A3.1A.30.18.30.16.06.03.55.1D.25.01.01.FF.04.0C.30.0A.06.08.2B.06.01.05.05.07.03.03.30.0D.06.09.2A.86.48.86.F7.0D.01.01.05.05.00.03.82.01.01.00.44.D5.3B.91.0E.32.3D.9E.D8.92.17.F7.30.C1.F0.F8.C5.00.99.08.7E.07.62.A7.4C.7D.BD.2B.B3.93.CF.AB.28.55.C6.6F.BB.AF.AD.0E.31.A6.32.A8.52.6C.5C.35.9B.7E.66.CC.DA.71.27.CC.42.92.30.54.CB.C4.B1.06.F5.33.13.7D.16.81.EC.F6.A7.4E.13.7A.2B.59.40.A1.98.3D.01.8A.A4.ED.05.92.9F.AC.6F.57.E1.C1.95.EF.21.4A.61.6C.A0.29.00.EA.AA.88.D7.F2.E4.9A.7D.95.41.62.E8.67.A9.B8.E8.4C.58.90.49.44.CD.E2.36.0B.85.42.E6.7D.D4.12.CF.E1.71.FC.88.1E.92.AE.4A.D7.96.4D.04.AB.C5.CF.F7.3C.24.8F.C1.43.99.FF.EB.C0.02.88.EA.77.3A.8C.3F.60.68.D7.CF.96.E7.4B.66.90.D0.52.50.BA.F9.D3.DF.BC.7C.27.66.71.8A.04.A0.7B.35.03.11.EE.79.4D.51.25.65.87.92.3B.B5.03.C2.FD.01.0B.FF.47.10.E1.DC.3C.2C.70.8A.40.90.0D.F0.C1.64.3D.06.54.88.03.88.33.22.D3.D5.CB.A2.5A.C9.0B.46.44.FD.A1.12.53.FF.33.20.1F.36.70.05.2D.AC.4E
Co-signerCVC = hexstr: 30.82.03.A1.30.82.02.89.A0.03.02.01.02.02.10.68.42.CB.72.AC.75.DD.BE.CF.17.A4.55.F7.9A.19.E1.30.0D.06.09.2A.86.48.86.F7.0D.01.01.05.05.00.30.81.97.31.0B.30.09.06.03.55.04.06.13.02.55.53.31.39.30.37.06.03.55.04.0A.13.30.44.61.74.61.20.4F.76.65.72.20.43.61.62.6C.65.20.53.65.72.76.69.63.65.20.49.6E.74.65.72.66.61.63.65.20.53.70.65.63.69.66.69.63.61.74.69.6F.6E.73.31.15.30.13.06.03.55.04.0B.13.0C.43.61.62.6C.65.20.4D.6F.64.65.6D.73.31.36.30.34.06.03.55.04.03.13.2D.44.4F.43.53.49.53.20.43.61.62.6C.65.20.4D.6F.64.65.6D.20.52.6F.6F.74.20.43.65.72.74.69.66.69.63.61.74.65.20.41.75.74.68.6F.72.69.74.79.30.1E.17.0D.30.31.30.37.31.31.30.30.30.30.30.30.5A.17.0D.32.31.30.33.30.32.32.33.35.39.35.39.5A.30.65.31.0B.30.09.06.03.55.04.06.13.02.55.53.31.1D.30.1B.06.03.55.04.0A.13.14.4D.6F.74.6F.72.6F.6C.61.20.43.6F.72.70.6F.72.61.74.69.6F.6E.31.0F.30.0D.06.03.55.04.0B.13.06.44.4F.43.53.49.53.31.26.30.24.06.03.55.04.03.13.1D.43.6F.64.65.20.56.65.72.69.66.69.63.61.74.69.6F.6E.20.43.65.72.74.69.66.69.63.61.74.65.30.82.01.22.30.0D.06.09.2A.86.48.86.F7.0D.01.01.01.05.00.03.82.01.0F.00.30.82.01.0A.02.82.01.01.00.A6.37.F0.D3.AC.74.D4.CA.A5.AA.90.00.42.C4.9A.C0.B0.83.87.D3.F7.FB.92.81.21.B3.34.E1.59.4A.59.AF.73.E9.4A.C8.12.A5.F5.9D.60.4E.F6.24.D5.6D.DA.01.41.14.43.A9.0F.F5.48.E9.9E.E2.32.BD.66.53.4E.0C.65.89.9D.06.3A.F5.DB.BD.7D.9B.A9.36.1B.0A.D2.14.96.BA.5E.6D.79.34.97.69.50.DA.7D.C6.89.91.8C.81.9F.F5.97.7A.5A.24.01.D3.F2.0F.EB.E2.74.9C.AC.29.65.A4.FB.D5.C0.51.13.C4.D2.DB.6E.8E.C4.58.07.90.6F.1B.F3.1A.CC.A4.FD.8D.8E.E9.13.DE.27.BF.FD.9B.EA.D2.27.DC.2F.F4.EF.89.86.8A.B3.B7.35.7F.3F.19.5D.A6.2A.77.98.39.ED.3D.CE.DF.21.83.70.C2.C1.10.7F.60.D5.9A.D3.49.4A.51.6E.56.38.07.D1.3B.5D.F9.22.52.28.31.3A.4C.53.F0.FE.1B.99.8B.01.C4.A5.EE.17.15.0E.F7.2D.28.6C.F7.1E.5A.0F.E6.83.0A.5B.E0.82.FE.77.4F.C0.51.B8.31.42.D3.52.78.54.41.4E.12.D5.A6.55.7F.B8.38.DC.D0.3F.B4.0A.10.68.6D.4E.49.02.03.01.00.01.A3.1A.30.18.30.16.06.03.55.1D.25.01.01.FF.04.0C.30.0A.06.08.2B.06.01.05.05.07.03.03.30.0D.06.09.2A.86.48.86.F7.0D.01.01.05.05.00.03.82.01.01.00.44.D5.3B.91.0E.32.3D.9E.D8.92.17.F7.30.C1.F0.F8.C5.00.99.08.7E.07.62.A7.4C.7D.BD.2B.B3.93.CF.AB.28.55.C6.6F.BB.AF.AD.0E.31.A6.32.A8.52.6C.5C.35.9B.7E.66.CC.DA.71.27.CC.42.92.30.54.CB.C4.B1.06.F5.33.13.7D.16.81.EC.F6.A7.4E.13.7A.2B.59.40.A1.98.3D.01.8A.A4.ED.05.92.9F.AC.6F.57.E1.C1.95.EF.21.4A.61.6C.A0.29.00.EA.AA.88.D7.F2.E4.9A.7D.95.41.62.E8.67.A9.B8.E8.4C.58.90.49.44.CD.E2.36.0B.85.42.E6.7D.D4.12.CF.E1.71.FC.88.1E.92.AE.4A.D7.96.4D.04.AB.C5.CF.F7.3C.24.8F.C1.43.99.FF.EB.C0.02.88.EA.77.3A.8C.3F.60.68.D7.CF.96.E7.4B.66.90.D0.52.50.BA.F9.D3.DF.BC.7C.27.66.71.8A.04.A0.7B.35.03.11.EE.79.4D.51.25.65.87.92.3B.B5.03.C2.FD.01.0B.FF.47.10.E1.DC.3C.2C.70.8A.40.90.0D.F0.C1.64.3D.06.54.88.03.88.33.22.D3.D5.CB.A2.5A.C9.0B.46.44.FD.A1.12.53.FF.33.20.1F.36.70.05.2D.AC.4E
Enable2.0Mode = 1
This I found helpful in troubleshooting initialization problems
http://www.cisco.com/c/dam/en/us/support/docs/broadband-cable/data-over-...
I just wanted to take the time to say thanks to everyone for assisting with this. I have the cmts up and running with a basic setup and put it on a small plant to see how it handles data. Next week ill look into better load balancing and security. The forum posts on here have helped me a lot and everyone's help. Ive read more cisco white papers the last 10 days than I thought I would in a short time frame. Its good to know everyone is here as an extra voice God knows we all need it sometimes.
Cheers!