IOS UBR7246VXR + MC88V | docsis.org

You are here

IOS UBR7246VXR + MC88V

3 posts / 0 new
Last post
ncalvo
IOS UBR7246VXR + MC88V

Hello everyone,

Had until now one Arris C3 and have migrated to a Cisco UBR7246X NPE-G2 and MC88V card. I'm using MTA arris and they need the dynamic service flow for voip.

I do not know if the problem of IOS or configuration but I can not activate this service and lost calls.

In addition, the debug system does not work and I do not send reports or by syslog nor console ...

I have the IOS:

BOOT variable = disk2: ubr7200p-jk9su2-mz.122-33.SCI3.bin, 1;
BOOTLDR variable = bootflash: ubr7200p-kboot-mz.122-33.SCD7.bin

Can anyone provide me with a more current IOS?

Jun 13 19:30:32 192.168.1.9 1306: SLOT 3: Jun 13 19:30:30.667 CEST: %UBR7200-4-SERVICE_FLOW_ERROR: CM MAC: 001d.cd35.a5ce Service flow direction: Downstream, Param code: 49, Confirm code: 3
Jun 13 19:30:45 192.168.1.9 1307: SLOT 3: Jun 13 19:30:43.195 CEST: %UBR7200-4-SERVICE_FLOW_ERROR: CM MAC: 001d.cd6f.3ddc Service flow direction: Downstream, Param code: 49, Confirm code: 3
Jun 13 19:30:48 192.168.1.9 1308: SLOT 3: Jun 13 19:30:46.751 CEST: %UBR7200-4-SERVICE_FLOW_ERROR: CM MAC: 001d.cd35.a5ce Service flow direction: Downstream, Param code: 49, Confirm code: 3
Jun 13 19:31:07 192.168.1.9 1309: SLOT 3: Jun 13 19:31:05.747 CEST: %UBR7200-4-SERVICE_FLOW_ERROR: CM MAC: 001d.ce1d.868b Service flow direction: Downstream, Param code: 49, Confirm code: 3
Jun 13 19:35:34 192.168.1.9 1310: SLOT 3: Jun 13 19:35:32.331 CEST: %UBR7200-4-SERVICE_FLOW_ERROR: CM MAC: 001d.cd35.a5ce Service flow direction: Downstream, Param code: 49, Confirm code: 3
Jun 13 19:40:58 192.168.1.9 1312: SLOT 3: Jun 13 19:40:56.407 CEST: %UBR7200-4-SERVICE_FLOW_ERROR: CM MAC: 001d.cdf7.7e96 Service flow direction: Downstream, Param code: 49, Confirm code: 3

wittmann
Maybe you must activate dQoS-Lite

Try to configure:

configure terminal
packetcable authorize vanilla-docsis-mta

But keep in mind that dQoS-Lite without COPS authorization due a CMS or Policy Server is a security problem. Every skilled cable modem hacker can request resources.

Best regards,

wittmann

wittmann
Maybe you have to activate dQoS-Lite

Try to configure

configure terminal
packetcable authorize vanilla-docsis-mta

But mention that activating dQoS-Lite without COPS authentification due a CMS or Policy Server is a security problem. Every skilled cable modem hacker can occupy resources.

Best regards,

wittmann

Log in or register to post comments