You are here

Home

Software, Testing and Provisioning Tools

To have any listing updated or to add another vendor, please click "add new comment" below and provide the pertinent information. Dead links, updated information, anything! Just leave a note and the page will be updated shortly. Please note that no particular vendor preference is implied - links are listed alphabetically.

Commercial Provisioning Software
Cablesight Provisioning & OSS Management Software for CMTS Routers.
Cisco Broadband Configurator. Creates CM config files. Free to use, java, may require CCO access.
Cisco Network Registrar (CNR). DNS/DHCP system that provides services for DOCSIS service provider networks.
Damery ProMo Provisioning & Monitoring software, providing alarms, billing and history.
Daphne sa JADE-PICO CMTS provisioning and monitoring software.
InCa NMS provisioning software by iKron Ltd., Hungary.
Incognito Software Broadband Command Center DOCSIS and PacketCable provisioning.
Integrated Broadband Services Integrated Full Service provisioning system with ISP services.
Intraway Broadband Service Delivery Platform.
JM-Data CN-Admin Provisioning and RF Analysing Tool Software for Cable Operators.
MPThrill MPT-MNG Pro provisioning software.
Promptlink Integrated provisioning system.
Sigma Systems Service Management Platform - a J2EE-based service control engine that manages VoIP, High Speed Internet, and other services.
Weird Solutions Broadband Provisioner IPAM and provisioning solutions for DOCSIS 3.0, 3G, LTE, VoIP and IPTV.
Zcorum A complete suite of broadband Internet and communication services for DOCSIS, VoIP, LD, Wireless, DSL and CALEA monitoring.

DOCSIS Monitoring, Measuring, Testing
Averna Provides a line of DOCSIS testing and verification solutions: DP360 DOCSIS Protocol Analyzer, Jupiter (design verification) and Mercury (manufacturing verification)
Excentis Traffic generator/analyser fully capable of performing (Euro)DOCSIS 3.0 traffic tests (IPv4&v6,Multicast). Testing services: conformance testing according (Euro)DOCSIS 1.0/1.1/2.0/3.0 ATPs; load, acceptance, interoperability testing.
Fanfare Software iTest enables those with and without programming skills to contribute to automating tests, reduces testing cycles 2 - 5x. Site includes community forums.
iGLASS Outsourced Monitoring and NOC Services for DOCSIS plants starting at just $500 per month. Triple-play support available. (888) YOUR-NOC
JDSU Cable network testing devices.
JM-Data CN-Admin Provisioning and RF Analysing Tool Software for Cable Operators.
MPThrill Cable Modem Checker Module (CMCM). A day-to-day tool for troubleshooting problems, isolating faults, diagnosing the cause of issues.
Promptlink Cable plant monitoring, cable modem test platform and cable modem firmware management solutions.
Shenick Systems allows you to measure quality of experience or service satisfaction using a "Per Flow" test approach. Allows end-to-end performance testing from the CMCI to the CMTS-NSI.
Simplesoft DOCSIS OSS Cable Modem Test Suites. SimpleTester is a SNMPv1/v2c/v3 test tool that verifies SNMP agent implementations.
Spirent Communications Provides solutions for functional, performance, and interoperability testing. Designers use Spirent tools in R&D and pre-deployment testing and to prepare for CableLabs certification.
Sunrise Modular test toolkit analyzer.
Tollgrade Communications Provides HFC status monitoring via DOCSIS, HMS, and legacy, and PacketCable VoIP testing solutions.
TruVizion powered by ZCorum. Provides cable ISPs full service network data, bandwidth management and analytic tools.
Visionary Networks DRUM - DOCSIS Reporting, Utilization and Measurement, OSS for large and small networks.

Open Source / Other Projects

Autoboot DHCP/TFTP provisioning services. DHCP requests are translated into simple text format and can be passed to a script/DB.
Birds-Eye.Net Broadband Script Archive.
Braa Very fast SNMP stack. Primarily designed for querying LOTS of cable modems.
docsis is a small program that can be used to generate binary configuration files for DOCSIS-compliant cable modems.
docsis_server is a combination DHCP server, TFTP server, Time of Day server, and a SYSLOG server. The docsis_server is designed to boot up cable modems as well as customer PC equipment.
DocsDiag is a program for reading diagnostic data from DOCSIS cable modems via SNMP.
ISG Tools Shell and cgi scripts for cable ISPs. Modem/host search (wildcard support), diagnostics, IP logging (w/cgi search interface), flap stats and more. Reduces what takes minutes in shell sessions into a 15 second web based search.
Quelea is a web-based tool that will do monitoring, measuring and provisioning for CMTS, CM, routers. Written in perl, it can use any database back-end.

Comments

Sun, 04/25/2010 - 13:45 — redpeppers

Cable modem operations and provisioning web based software. DHCP authentication, SNMP tracking, RRDTool graphing and monitoring, Inventory tracking, Ticketing system, Property and customer management, etc. Full ISP suite for major or minor system operators. Check out http://www.directlinkadmin.com.

DirectlinkAdmin Sales Group
866-680-8433 Toll Free
314-471-6405 Direct

Fri, 09/03/2010 - 01:28 — canni

Perl has very nice implementation of alternative to docsis, it can generate config files from nice user friendly formats like YAML :)

http://search.cpan.org/~jhthorsen/DOCSIS-ConfigFile-0.5901/lib/DOCSIS/Co...

Wed, 12/08/2010 - 06:09 — micabu

Hello,

we are offering an easy to use provisiong solution named DOPS (Docsis Opensource Provisiong Server).

DOPS is...
...an easy-to-use solution for provisioning of Fiber-to-the-Home,
DOCSIS, PacketCable and SIP devices. The “Ready to Run” appliance
server speeds up implementation and reduces operational
expenditures. Individual licencing models are designed to fit perfectly
into your individual business case.

DOPS™ is a turn-key device provisioning system for broadband operators which reduces time, cost and complexity of deploying high-speed data
and Voice-over-IP services. DOPS™ is capable of handling a mixture of different network technologies. DOPS™ is based on open source software
using well-proven and highly configurable Linux OS and was developed with the idea of a simple and ready to use tool to provision cable modems,
eMTAs , Fiber-CPEs and CPEs connected to a CMTS or Ethernet Switch. Using operator-defined templates, the solution confirms subscriber
information and service options before network access is granted.

Technical Details
• Integrated DHCP-Server, DNS-Server, ToD-Server (Time of Day), TFTP-Server, Syslog-Server
• Support for FTTH, DOCSIS®, PacketCable™ and SIP
• Provisioning across network technologies from cable to fiber
• Open source core components ensure maximum flexibility and security
• Web browser based user interface enabling simple access to all settings and configurations
• On demand dynamic device configuration files increases security and saves disc-space
• Deployment on pre-installed 1RU appliance-server

All services are MySQl based in order to have an open standard interface to other systems.
We have allready some deployments with DOCSIS/EuroDOCSIS 3.0.
Tested with several CMTSes.

For more details please contact:

WISI COMMUNICATIONS
GMBH & CO. KG

Wilhelm-Sihn-Strasse 5-7
D-75223 Niefern-Öschelbronn / Germany

Michael Bülte
Systems-/Application Engineering NGN
michael.buelte@wisi.de
www.wisi.de

Sun, 03/20/2011 - 19:13 — cftvgy

Hi, I am a student and I am working on my gradutation project. The school just bough a CMTS from arris. We have a Linux Server Using Vecima MSM.... BUt I can't get to fing how to do SIP provisionning for the MTAs... Is there anyway we could try your software? If it's open.. I'd love to test it... Currently we have 10 MtAs and an Asterisk Server. I just don't have a clue on how to do provisionning SIP with the ARRIS. Could you help me or let us try a DEmo of you software?

Thanks Danik

Tue, 03/15/2011 - 05:31 — msante

The company where I work, Vianet SRL, has developed a provisioning and monitoring software that is already in its version 4.5.5. We would like to be part of the list of commercial software that leading supply this page. I attached URL of the presentation of our product http://www.vianetcon.com.ar/templates/spismi/.
Thanks and regards.
Excuse me my english, I'm from Argentine.

Thu, 05/26/2011 - 14:57 — rmac03053

Hello,

I am looking for a stand alone DOCSIS 3.o Cable Modem Provisioning Tool. Do you have anything of that nature or direct me to someone who does?

Robert Macfarlane
IP Engineer

Fri, 04/15/2011 - 17:11 — Miguel Angel Go...

Software for Provisioning DOCSIS & PacketCable devices, Monitoring HFC Plants, Block DOCSIS Clons, Alarms System, Traffic, Sopport modules, interface with Softswitch, CAS, etc.

Sun, 04/17/2011 - 12:31 — astrit

Any website to get a little bit more informed?

Sun, 08/14/2011 - 11:04 — DOXcontrol

DOXcontrol has developed a suite of DOCSIS software, which is geared toward the independent cable operator. The software design is easy-to-use, but is also very powerful and cost-effective for cable operators of all sizes.

DOXcontrol CORE is a cable modem and MTA provisioning system called DOXcontrol CORE, which is an all-in-one provisioner for both cable modems as well as MTA (telephony voip devices).

DOXcontrol Modempad is an advanced DOCSIS configuration file creator/editor with easy-to-use wizards and drop down menus. There is no need to know complex OIDs with the simple GUI. Additionally, it also creates MTA (VOIP) config files and includes several manufacturer specific MIBs.

DOXcontrol RF Monitor is designed to provide an interactive graphical interface to monitor, record and analyze the RF characteristics of a DOCSIS system by pulling and displaying the relevant information from the CMTS and various HFC client devices.

Several more DOXcontrol software titles are under development and will be released soon. All software is compatible and has been tested for interoperability with the following CMTS units:

ARRIS CMTS 1000/1100/1500, C3
CASA C2200, C3200
Cisco uBR7111/E, uBR7114/E, uBR7223, uBR7246, uBR7246VXR
Terayon BW3200
Motorola BSR1000/2000 (Pending)
ADC Cuda 12000 (Pending)

For more information, please visit: www.doxcontrol.com

Also, please visit us at Booth 1812 at the SCTE Show in Atlanta, GA from November 15-17, 2011.

Fri, 12/16/2011 - 14:04 — neven

DACS provides a centralized and automated platform for cable service providers to control and configure subscriber devices in DOCSIS based access networks.

http://www.bulb-ict.com/docsis-provisioning

Thu, 01/12/2012 - 14:45 — DataHardware - Lee

DataHardware/AH Technology Solutions is a leading hardware provider for Cisco DOCSIS CMTS routers and cards. Cisco UBR 7200 / 10000 series is carried in stock, fully tested by our certified technicians, and backed with our 1 year warranty. Please contact me if you have any Cisco UBR 7200 / 10000 series needs.

Best Regards,
Lee Co
DataHardware.com
Tel: 714-966-2100 Ext 109
Email: Lee.Co@Datahardware.com
AIM: LeeTeleComp

Thu, 02/02/2012 - 04:49 — odanquah

Have a look at our new Broadband Provisioner (On-line Demo) for Cable Networks (DOCSIS 3.0, IPv6)

  URL: http://213.115.152.226:5000
  user: admin
  password:

Contact e-mail : Enoch Odame Danquah enochd@weird-solutions.com