Hi list,
I've a very strange problem. I was trying to set 3 different TLVs in CM config file like the below:
VendorSpecific
{
VendorIdentifier 0x000304; ( Juniper CMTS)
GenericTLV TlvCode 1 TlvLength 2 TlvValue 0x0259; (VLAN 601)
VendorSpecific
{
VendorIdentifier 0x0000ca; (Arris CMTS)
GenericTLV TlvCode 1 TlvLength 2 TlvValue 0x0259; (VLAN 601)
VendorSpecific
{
VendorIdentifier 0x000f21; (Webstar CM)
GenericTLV TlvCode 22 TlvLength 2 TlvValue 0x1b1b;
GenericTLV TlvCode 23 TlvLength 2 TlvValue 0x1b1b;
....
.... (other eMTA TLVs)
and the CMTS REJECTs the Cable Modem. When I set only two from whichever TLVs above, the modem is connecting with CMTS, but with more than three CMTS rejects it with the message:
REG REQ rejected - Message syntax error . MAC Addr: 00:0F:21:27:9B:2A
I want to know if somebody has this kind of problem, setting more than three Vendor Specific TLVs.
Regards
Astrit
Modem Rejected by CMTS
If somebody would be interested to know, I've fixed this problem:
The TLV's in config file should look like the following:
VendorSpecific
{
VendorIdentifier 0x000304; ( Juniper CMTS)
VendorIdentifier 0x0000ca; (Arris CMTS)
GenericTLV TlvCode 1 TlvLength 2 TlvValue 0x0259; (VLAN 601)
VendorSpecific
{
VendorIdentifier 0x000f21; (Webstar CM)
GenericTLV TlvCode 22 TlvLength 2 TlvValue 0x1b1b;
GenericTLV TlvCode 23 TlvLength 2 TlvValue 0x1b1b;
....
.... (other eMTA TLVs)
Now the modem doesn't reject by the CMTS.
delay in VoIP calls
Astrit
I read you are using C3 with DPC2203.
We are having some delay (like 2-3 sec) in the calls, do you have any simmilar issue ?
We try with eMta Arris and all work fine.
Best regards.
Demian