Modem parameters | docsis.org

You are here

Modem parameters

3 posts / 0 new
Last post
krs123
Modem parameters

Can anyone advice if D3.0 modem parameters are fine? What settings can be adjusted possibly?

System

├────────────────────┼───────┬───────┬───────┬───────┤
│Receive Power Level │-0.4 │-1.1 │-1.6 │-2.9 │
│ │dBmV │dBmV │dBmV │dBmV │
├────────────────────┼───────┼───────┼───────┼───────┤
│Signal to Noise │32.6 dB│33.1 dB│33.6 dB│33.7 dB │
│Ratio │ │ │ │ │
├────────────────────┼───────┼───────┼───────┼───────┤
│Transmit Power Level │40.3 │41.8 │43.3 │44.3 │
│ │dBmV │dBmV │dBmV │dBmV │
├────────────────────┼───────┴──────┴───────┴─────── ┤
│Cable Modem Status │Operational │
└────────────────────┴───────────────────────────────┘

Downstream Channel
┌────────────────────┬───────┬───────┬───────┬───────┐
│Channel ID │1 │2 │3 │4 │
├────────────────────┼───────┼───────┼───────┼───────┤
│Downstream Frequency│330.00 │338.00 │346.00 │354.00 │
│ │Mhz │Mhz │Mhz │Mhz │
├────────────────────┼───────┼───────┼───────┼───────┤
│Modulation │256QAM│256QAM│256QAM│256QAM│
├────────────────────┼───────┼───────┼───────┼───────┤
│Power Level │-0.6 │-1.2 │-1.8 │-3.0 │
│ │dBmV │dBmV │dBmV │dBmV │
├────────────────────┼───────┼───────┼───────┼───────┤
│Signal to Noise │32.6 dB │33.2 dB│33.7 dB│33.6 dB │
│Ratio │ │ │ │ │
└────────────────────┴───────┴───────┴───────┴───────┘
Upstream Channel

┌────────────────────┬───────┬───────┬───────┬───────┐
│Channel ID │1 │2 │3 │4 │
├────────────────────┼───────┼───────┼───────┼───────┤
│Upstream Frequency │37.30 │43.90 │50.30 │56.70 │
│ │Mhz │Mhz │Mhz │Mhz │
├────────────────────┼───────┼───────┼───────┼───────┤
│Modulation │64QAM │64QAM │64QAM │64QAM │
├────────────────────┼───────┼───────┼───────┼───────┤
│Bit Rate │30720 │30720 │30720 │30720 │
│ │Kbps │Kbps │Kbps │Kbps │
├────────────────────┼───────┼───────┼───────┼───────┤
│Power Level │40.3 │41.8 │43.3 │44.3 │
│ │dBmV │dBmV │dBmV │dBmV │
└────────────────────┴───────┴───────┴───────┴───────┘

oss-iris
Yes it s ok

Yes it s ok
Maybe signal noise values are little bit low for your downstreams
You could try to increase output value of your cmts but it depends if you have other signals and their power/modulation.

Endrit
Modem parameters

You have some info on this link.
https://www.speedguide.net/faq/what-cable-modem-signal-levels-are-consid....

It depends on the modem and how much it tolerates.

In my experience anything
below 33 dB and above 41-42 dB of DS SNR its bad.
below -4 dB and above 13 dB of DS Power its bad.

below 30 dB of US SNR its bad
below 37 dB and above 53 of US Power its bad.

Endrit

Log in or register to post comments